555058
9
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
JA-80Y user manual MFJ55800
9
Acoustic signalling can be used on both GSM and landline networks.
The GSM dialler can report all event information from the alarm system via SMS or
acoustically. You can change the setting of event reporting for any phone number –
(see 11).
M Sequence What will be sent to phone no(s):
1. 81 1 ____ *0
2. 81 2 ____ *0
Alarm SMS reporting any type of alarm which occurred in the
system (intrusion, fire, tamper, panic).
Technical SMS reporting system faults.
3. 81 3 ____ *0
4. 81 4 ____ *0
Alarm SMS plus phone call for any alarm in the system. If
you answer the call you hear a siren sound.
Technical SMS reporting system faults.
5. 81 5 ____ *0
6. 81 6 ____ *0
Alarm SMS plus phone call for any alarm in the system.
Information SMS whenever the system is being set/unset.
Technical SMS reporting system faults.
7. 81 7 ____ *0
Phone call for any alarm in the system. If you answer the call
you hear a siren sound. This setting is suitable for landline
network calls.
8.
Technical SMS reporting system faults. This memory is
reserved for an installer.
Table 1 Factory-default reports assigned to the numbers 1 to 8
12. Authorizing a phone number for dialling in
You can authorize a phone number for dialling-in by storing * at the end of the number
and following it by a single digit (1, 2, 3, 8 or 9 – see below). If this number calls, the
communicator generates * after the first ring (as if it had been entered manually on the
system keypad).
This allows you to use dialling-in for the following:
1 setting the whole system (equivalent to the ABC keypad button)
2 setting A (= A button)
3 setting A and B for partial setting, or B for a split system (= B button)
8 PGX turns on for 2s (if PGX is programmed for the 2s pulse function)
9 PGY turns on for 2s (if PGY is programmed for the 2s pulse function)
13. GSM signal strength measurement sequence 922
Good quality GSM signals are necessary for the reliable functioning of the communicator.
Entering 922 starts GSM signal measurement. The keypad then displays the signal
strength in the range 0/4 to 4/4 and measurement is repeated every second (indicated by
beeps). The signal should read at least 2/4. In places with a weak signal we recommend
consulting your installer. Press the # key to exit GSM signal measurement.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-80Y bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-80Y in de taal/talen: Engels als bijlage per email.

De handleiding is 0,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-80Y

Jablotron JA-80Y Installatiehandleiding - English - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info