555058
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
The JA-80Y GSM communicator - 6 - MFJ55304
5.4.1. Assigning events to be reported by SMS to a particular
mobile phone number
To link events to being reported by SMS, enter:
82 M ec x
where
M phone number memory 1 to 8
ec event code 01 to 32 (see the above table)
x 0 = no SMS report, 1 = SMS report
Example: if 82 8 03 1 is programmed and a fire alarm is triggered
(event 03 in the table), it will be reported by SMS to the phone number
stored in memory M8
5.4.2. Assigning events to be reported by phone call to a
particular phone number
To link events to being reported by phone call, enter:
83 M ec x
where
M phone number memory 1 to 8
ec event code 01 to 32 (see the above table)
x 0 = no phone call, 1 = call
Example: if 82 1 03 1 is programmed and a fire alarm is triggered
(event 03 in the table), the phone number stored in memory M1 will be
called and if the call is answered, a siren sound will be heard.
Notes:
Phone call reports are mostly used as an audible notification to
alert the user of a detailed report sent by SMS
If both SMS + call reports are enabled for events, the SMS is sent
first and then the number is called afterwards. But total priority is
given to ARC reports if enabled (see 7.1 )
5.5. SMS text editing
The communicator contains various text strings which are used to
create SMS reports and also SMS instruction text. Language of the
text can be set – see 5.1. These text strings cannot be changed from
the system keypad, but they can be edited by Comlink software, via
the Internet (www.GSMLink.cz
) or by sending the following SMS
instruction:
code_TXT_n,text,n,text,......n,text
where
code is a valid access code (e.g. factory defaults: 8080, 1234)
_ is a space
TXT instruction to edit texts
n text number (0 to 611 see the following table)
, comma (or full stop)
text the new text (max. 30 characters) which will replace the
former text. It is invalid to enter a comma or a full stop inside
the text string, but a space is valid within the text string
Notes:
A single TXT instruction can change multiple texts (limited only by
the maximum length of a single SMS)
the communicator is not case-sensitive and it is recommended to
use only English ASCII characters (some networks do not support
non-English national characters)
the communicator creates SMS reports with 5 parts: installation
name, event description, source (code or device) number (01 to 50),
source name, time and date
the maximum possible length of an ASCII SMS is 160 characters
(only 70 characters for national characters). If this length is
exceeded, the report is sent as multiple SMSes
Examples: if the service code is 8080 then the SMS instruction:
8080 TXT 20,key fob Bob,21,Key fob Jane
changes the description (name) of the key fobs enrolled to addresses
20 and 21
8080 TXT 605,heating on,606,heating off
edits the text of the two instructions used to command the heating to
be switched on and off by the PGX output (the PGX output must be
programmed to have an ON/OFF function)
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-80Y bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-80Y in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-80Y

Jablotron JA-80Y Gebruiksaanwijzing - English - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info