554884
3
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
User manual JA-60GSM - 10 - MFJ51808
The emergency number can be entered by:
99 xx...x F0
where:
xxx…x is a telephone number (max. 20 digits), enter F9 before the number if you
need + prefix for international calls
4.6. Remote programming of the alarm via SMS
The command PRG is used for sending programming and operating commands to the alarm system.
It has the same effect as if the commands are entered on the alarm system keypad. Enter the following
command :
yyyyyPRGseq,seq,seq,
where:
yyyyy is the remote access code; factory default setting is 1111; this code can be changed,
see section 4.1
PRG is the command identification
seq are the programming or operating sequences, consisting of characters 0 to 9, F, N.
There can be more than one sequence in one SMS. The particular sequences must
be separated with a comma or period. The number of sequences in one SMS is only
limited by the maximum size of the SMS in the GSM network.
separator (asterisk or space)
Example: if the control panel is disarmed and its master code is 1234, then if you want to set user code #2
for the alarm system, use the following command SMS: 1111
PRG
F61234 02 6789
After receiving this command message, the new user code (6789) will be added into the control panel.
4.7. Prepaid SIM cards
The JA-60GSM communicator can send information about the credit of a prepaid SIM card. An SMS
sent from any of the stored numbers (sequence 7t...) containing the word CREDIT followed by the
correct instruction (different for every provider) will result in the sending of the information about the
credit. Please ask your mobile phone provider for more information.
If you want to check the credit regularly use the following sequence.
CREDIT uuu..u xx yyy zz
where: uuu…u is the instruction given by the provider for receiving information about the amount
of credit
xx is the time period (in days) for every checking.
yyy is minimum level of credit
zz is a position of the credit in the information SMS sent by the provider
If the level of the credit is lower than set value (zz) the event “battery discharged GSM communicator”
will be sent to the preset telephone numbers. If the credit is restored the event “battery OK GSM
communicator” will be sent to the preset telephone numbers. To disable this function set the time (xx)
period to 00.
Note:
The user is responsible for the level of the credit
The producer does not recommend the use of prepaid cards.
User manual JA-60GSM - 3 - MFJ51808
Notes:
The system confirms an AM command with a reply SMS.
When system arming is impossible e.g. it is in the programming mode, you will be notified about the
situation via a reply SMS.
If the alarm system is “split” the instruction will effect the section which belongs to the corresponding access
code
If arming without a code is enabled on the control panel, the AM command can be used without any access
code. In this case the command performs the same action as if the keys F 1 are entered on a keypad.
1.6. Disarming via SMS (DM xxxx)
Command DM followed by a valid access code disarms the system. If the system is already
disarmed the command will be ignored.
Send SMS text to the dialer: DMxxxx
xxxx is a valid alarm system access code (Master or user)
separator (asterisk or space)
Example: Sending of DM
1234 will disarm the system in the same way as if the code 1234 is entered for
disarming on system’s keypad.
Notes:
The system confirms disarming via a reply SMS
When system disarming is impossible – for example it is in the programming mode, you will be notified
about the situation via a reply SMS.
If the alarm system is “split”, the instruction will effect the section which belongs to the corresponding access
code
If the alarm system is split and the command (AM or DM) is followed by the user code, it will effect the
system the same way as if the code is entered from the alarm system keypad – no matter if AM or DM is
used (it will arm if the system is disarmed and it will disarm if the system is armed).
1.7. Mode request via SMS (MO)
Command MO can be used to read the current alarm system mode. The dialer will reply with a
reporting SMS to the phone which sent the MO command about status, level of GSM signal, GPRS
status, successfulness of transferring date to the CMSs .
Send SMS text to the dialer: MO
Example: If the system is armed, it will reply to the MO instruction with the SMS: Alarm system
reports: Control panel status: Armed,GSM:7,GPRS OK,MS1 NOT,MS2 OK
Note: if you want to protect this command by a password, set your own command text – see section 3.3.
1.8. Last event request by SMS (ME)
Instruction ME is used for reading the last event recorded in the alarm system’s memory. The dialer
will reply with a reporting SMS.
Send SMS text to the dialer: ME
Example: After a fire alarm, it will reply to the ME instruction with the SMS “ Alarm system reports:
Last event: Alarm end Control panel Time: 02.06. 19:48 “
Note: if you want to protect this command by a password, set your own instruction text – see 3.3.
1.9. Remote controlling of an appliance via SMS (AUXON, AUXOFF)
These commands can be used for operating the AUX output (e.g. heating in a house). The dialer
confirms the command performance via a reply SMS.
To switch on the AUX output, send SMS text: AUXON
To switch off the AUX output, send SMS text: AUXOFF
To switch on the PgX(Y) output, send SMS text: PGON
To switch off the PgX(Y) output, send SMS text: PGOFF
Example: to switch the heating on send SMS: AUXON
Note: texts of these commands can be customized and protected by a password – see section 3.3.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-60GSM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-60GSM in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-60GSM

Jablotron JA-60GSM Installatiehandleiding - English - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info