554884
2
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
User manual JA-60GSM - 2 - MFJ51808
1. User features of the GSM dialer
The JA60GSM dialer offers many useful features described in detail below. The installer should
properly demonstrate the use of the system to the user after installation and instruct the user on how to
set user access codes.
1.1. Phone calls from the attached SMS-8010 telephone set (optional accessories)
After the GSM module is connected to the GSM network, an attached phone can be used. If you
pick up the phone you will hear a dial tone. Simply dial the number you want to call. You can also dial
the GSM communicator’s phone number from another phone and the attached phone will ring as a
normal landline phone would. If it is necessary to communicate with CMS the call from the attached
phone will be terminated in 10 minutes. If a busy tone is generated while the attached phone is being
used, it indicates either the line you are calling is busy or that the GSM communicator is busy with a
communication (alarm system data transfer has priority).
1.2. Sending SMS messages
If used, then the SMS-8010 phone can be used for easy and convenient receiving and sending of
SMS messages. The main features of SMS-8010 are:
Making calls – using the receiver or the build-in hands-free set
Writing SMS messages using an alphabetical keypad, message archiving (40 messages)
Call record function – caller identification and date/time
Integrated phonebook records up to 80 phone numbers and names
For detailed information see the SMS-8010 manual.
1.3. Telephone remote control of the alarm system
A Jablotron system equipped with the GSM dialer can be remotely controlled via a landline or mobile
phone. From a mobile phone there are two possibilities – either by text instructions sent via SMS or by
dialing-in and operating the system via the phone keypad, which operates in the same way as the alarm
system keypad. The dialing-in method can also be preformed from an ordinary landline telephone.
The following description matches the factory default settings of the dialer. The described features can
be modified during the installation. The installer should explain clearly any changes to the default settings.
1.4. General instructions for the remote control via SMS instructions
SMS instructions can be sent from a mobile phone or from Jablotron’s SMS website
(www.GSMlink.cz
).
SMS messages are not case sensitive. Only Standard English letters are accepted.
All SMS instruction words must be separated by a space.
If the % is used all previous text will be ignored. The %% symbol when used in SMS text ends
processing – all the following text will be ignored. It is recommended to use this symbol at the end of
the instruction if the provider sends some additional text after your message (advertisements etc.).
Warning: if any incoming SMS includes except a valid system command any extra text
which is not separated by % or %% symbols the command will not be executed
Examples of SMS: “Hi, this text will be ignored even if I write ME % MO %% Thank you” – Only MO
command will be executed
“Hi, MO” – Command in the SMS will be ignored because there is an extra text
The default command texts can be customized by an installer or user (see section 3.3). E.g.
the command AUXON can be changed to SWITCH ON HEATING etc.
1.5. Arming by SMS (AM xxxx)
The command AM followed by a valid access code is used for arming the alarm system. If the
system is already fully armed, this command will be ignored.
Send SMS text to the dialer: AMxxxx
xxxx is a valid alarm system access code (Master or user).
separator (asterisk or space)
Example: Sending of AM
1234 will arm the system in the same way as if the code 1234 is entered on
system’s keypad.
User manual JA-60GSM - 11 - MFJ51808
5. Web server remote access
5.1. Setting possibilities:
The setting server allows a user to read and change the control panel and dialer configuration. Data
transfer is made by sending an SMS. The web site allows the user to change:
control panel setting,
dialer setting,
set messages that will be transferred to up to 7 phone numbers,
The web site is able to read an event memory of a control panel as well (such as ComLink software). The
number of sent data SMS’s is optimized to reduce costs as much as possible.
5.2. Registration to the web site
Registration can be done in two ways:
Web site www.gsmlink.cz – to register your system use the registration code printed on the
warranty certificate (the code has a form xxxxx-xxxxx-xxxx and it is unique for each system)
Mobile phone – when the alarm system is in the programming mode, enter 972 xxxxx F0 on
the alarm system keypad (xxxxx is your mobile phone number). After a moment you will receive
an SMS with a registration code and the system will register to the web server.
5.3. Control panel or GSM dialer setting
If you want to set the control panel features you need to know your service and user code. After
receiving the correct SMS the GSM dialer will switch to the service mode (disarms and enters the
service mode), set the parameters, reads settings and switches back to the chosen mode (service,
armed or disarmed). Correct settings and state of the control panel is transferred back to the server.
5.4. Reading of history events
History events are readable in any state of the control panel (service code is not needed). One SMS
contains 20 events. If it is necessary to read all of the events the GSM dialer will send 7 SMS
messages.
6. The Modem function
The GSM communicator can also be used as an external modem for accessing the Internet (GPRS
format). It is necessary to have the GPRS in the SIM card activated and to have a connection cable
connected to the COM port of the PC. Support for MS Windows operating systems can be found on
the enclosed CD. The modem can be used only when all reports to the CMS, SMS and system’s calls
are executed.
When the modem is used:
It is possible to use the attached telephone, the internet connection will be temporally suspended
Received SMS’s are stored and they will be processed after disconnection of the modem
The modem will be disconnected if an alarm or arming event occurs
7. Additional information
7.1. Events reporting priorities:
If the dialer is activated to send an events report it will:
send information to CMS
send SMS reports (1st telephone number, 2nd telephone number,…. 8th tel. number)
send audible warnings (1st telephone number, 2nd telephone number,…. 8th tel. number) –
each number is called only once, no matter if it is answered or not
If any event is triggered which should be reported to a CMS while the alarm system is accessed remotely
from a phone, the report will be sent after the remote access is finished.
If the user cancels the alarm, all reports, which haven’t been sent yet, will be deleted. This doesn’t included
communication with the monitoring station.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-60GSM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-60GSM in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-60GSM

Jablotron JA-60GSM Installatiehandleiding - English - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info