707243
53
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
53
6.3 USING MULTIPLE BABY UNITS:
To make the use of multiple baby units easier, you can assign real
names to the baby units instead of ‘baby-1’, ‘baby-2’, etc. For this, see
paragraph 5.4.
When all babies are sleeping and the baby units
are all set to sleep mode, the parent unit will first
show the status of baby unit 1 (temperature, battery
indication, night light or lullabies are switched in,
etc.), after 15 seconds the status of baby unit 2, then
unit 3 and finally unit 4. This cycle is repeated for as
long as all babies are sleeping (or quiet).
- Unregistered baby units will be skipped.
- When a baby unit is registered, but not in communication with the
parent unit (out of range, empty battery, switched off), the parent unit
will emit a warning signal. Only after the cause for this out-of-range
notification is cleared, will the parent unit switch over to the next baby
unit.
As soon as one of the babies starts crying, the parent unit will instantly
indicate the sound and status of the baby unit where the crying is
coming from. Don’t forget that baby unit 1 always has the priority; this
means that when all babies are crying, the parent unit will indicate the
status of baby unit 1. The sequence is: baby-1, baby-2, baby-3, baby-4.
- When several babies are crying, the status of
the first crying baby will be shown (see above
sequence) in the display, but the display will
indicate that another baby is crying.
You can now briey press the button to switch priority and check the
status and sounds of Angel (in the situation mentioned above).
For each baby unit, you can turn the night light on or off, turn the
lullabies on or off and activate the feeding timer (feeding intervals are
the same for all baby units). For turning these functions on or off and
talking back to the baby unit, the parent unit must be in communication
with the concerned baby unit (the name of this baby unit must be shown
in the display).
6.4 DEREGISTERING:
Defective baby units or units no longer in use must be erased from
the parent unit’s memory to prevent the parent unit from constantly
indicating an out-of-range error for that baby unit.
You can do this by re-registering the baby units that are still in use. Only
the baby unit you’re no longer using should not be re-registered.
It is not possible to deregister a specific baby unit at the parent unit.
Brian is crying, his status is indicated and you’ll
hear the sound
Angel is also crying
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alecto DBX-62 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alecto DBX-62 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 16,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info