707243
51
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
51
5.5 TEMPERATURE ALARM:
The display of the parent unit shows the temperature transmitted by the
baby unit. You can assign a minimum or maximum temperature to this
function and have the unit sound an alarm when these values are exceeded:
1. briey press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to
open the menu
3. use the and buttons to select the option
TEMP ALARM
4. briey press the M button
5. use the and buttons to select whether you
want to set or adjust the lower or the upper limit
6. briey press the M button
7. use the and buttons to adjust the selected temperature limit and
briey press the M button
8. repeat step 5-7 if you want to set the other temperature limit
9. briey press the button to conrm the set temperature limits and to
leave the menu
the upper limit can be set between -3°C and 50°C
the lower limit can be set between -19°C and 3 degrees lower than the
upper limit
select ‘‘OFF” if you don’t want to set an upper or lower limit
when the set temperature limit is exceeded, the temperature display will
start flashing while ‘TOO WARM’ or ‘TOO COLD’ is shown
if the ALARM TONE function is activated, you’ll also hear short
notification tones
don’t forget that the temperature display is only an indication, you’ll have
to take a tolerance of +/- 2°C into account
at temperatures above 50°C and under -19°C, ‘- -’ will appear in the
display
5.3 DISPLAY LIGHT BRIGHTNESS:
You can adjust the intensity of the display light as follows:
1. briey press the button to activate the touch-screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option
BRIGHTNESS
4. briey press the M button
5. use the and buttons to select the desired
brightness
6. briey press the button to conrm you selection
and to leave the menu
you can choose from 8 brightness levels
a high brightness level ensures good readability, but also uses more
power.
5.4 NAME OF THE BABY UNIT:
Instead of the standard name “BABY-1” of the baby unit, you can program
your own chosen name.
1. briey press the button to activate the touch-screen
2. press and hold the M button for 3 seconds to
open the menu
3. use the and buttons to select the option
NAME
4. briey press the M button
5. use the and buttons to select the desired
baby unit (only when using multiple baby units)
6. briey press the M button, ‘BABY 1’ will appear
in the display (or another name you already set
earlier) and the cursor ( _ ) will ash underneath the rst letter
7. change the rst letter using the and buttons and briey press the M
button
8. repeat step 7 until the name is fully entered
9. briey press the button to conrm you selection and to leave the
menu
you can choose any of the 26 letters in the alphabet, the numbers 0-9
and a space
the name has a maximum length of 14 characters, including spaces
you cannot correct a mistake; in this case, leave the setting and start
again
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alecto DBX-62 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alecto DBX-62 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 16,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info