707243
52
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
52
5.6 ALARM TONE:
You can set the unit to emit a clear alarm tone when temperature limits are
exceeded, when the battery is low or when the baby unit is out of range. You
can turn this function on or off as follows:
1. briey press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option ALARM
TONE
4. briey press the M button
5. use the and buttons to turn this function on (ON)
or off (OFF)
6. briey press the button to conrm you selection and to leave the
menu
will appear in the display when the alarm tone is switched off
this setting only turns the alarm tone on or off; the alarm itself is not
changed
when the alarm tone sounds, you can turn it off by briefly pressing the
button
this does not turn off the feeding time alarm
5.7 VIBRATION FUNCTION:
If you’re carrying the parent unit with you in a noisy room (e.g. while vacuum
cleaning) or you don’t want sounds from the parent unit bothering other
people and you have set the volume to 0, you can switch on the vibration
function:
1. briey press the button to activate the touch-
screen
2. press and hold the M button for 3 seconds to open
the menu
3. use the and buttons to select the option
VIBRATION FUNCTION
4. briey press the M button
5. use the and buttons to turn this function on (ON)
or off (OFF)
6. briey press the button to conrm you selection and to leave the
menu
will appear in the display when the vibration function is switched on
6 EXPANSION
The DBX-62 is capable of registering up to 4 baby units. This way you
can monitor 4 babies and because you can assign an individual name to
each unit, you can directly determine which child is crying. Additionally,
for each baby unit you can set the talk-back function, feeding timer, room
temperature, lullabies and night light.
6.1 CODING SWITCH:
In the battery compartment you’ll find a coding switch with 4
positions corresponding with baby units 1, 2, 3 and 4. Make
sure to set an individual code for each baby unit.
6.2 REGISTERING:
Upon expanding, you must register (re-register) ALL baby units,
also the baby units that were already registered.
Preparation:
Both the parent unit and baby unit must be switched off (parent unit: briefly
press and hold the button until the display is completely blank, baby unit:
slide the power switch to the OFF position), but the power supply (adaptor
or batteries) must be connected).
1. press and hold the TALK button on the rear of the parent unit
2. now press and hold the button for approximately 3 seconds until the
parent unit turns on and P/PAIRING appears in the display with the P
ashing. Now release both buttons
3. press and hold the + button on the baby unit
4. now slide the power switch to the ON position, the red light will turn
on, and release the + button
5. briey press the button, the display of the parent unit will show
‘PAIRING BABY X (*) OK and you’ll hear 2 beep tones from the baby
unit you just registered
6. repeat instructions 3, 4 and 5 for the other baby units
7. nally, turn the parent unit and all baby units off and back on
8. the registration is now complete
*: X = 1-4, corresponding to the position of the coding switch
52

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alecto DBX-62 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alecto DBX-62 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 16,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info