478500
51
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 49FT-897D OPERATING MANUAL
Scan Skip Programming (Memory Mode Only)
Among the memories you have programmed, there may be
some stations which you do not wish to scan. For example,
broadcast signals (which are transmitted continuously) will
cause the scanner to stop, and such channels may be skipped
so as to avoid this inconvenience.
To remove a channel from the scanning loop:
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“b”
[
MW, SKIP, TAG
]
appears on the display.
2. Recall the memory channel to be skipped.
3. Press the
[
B
](
SKIP
)
key momentarily. The “hyphen” in
the memory channel number will change to become a
“dot;” this shows that this channel now is not included
in the scanning loop.
“PRIORITY CHANNEL” SCANNING
The FT-897Ds scanning features include a two-channel
scanning capability which allows you to operate on a VFO
or Memory channel, while periodically checking a Memory
Channel “M-001” for activity. If a station is received on the
Memory Channel “M-001” which is strong enough to open
the Squelch, the scanner will pause on that station in accor-
dance with the Scan-Resume mode set via Menu Mode No-
078
[
SCAN RESUME
]
. See page 62.
Here is the procedure for activating Priority Channel Dual
Watch operation:
1. Rotate the SQL control until the background noise is
just silenced, then store the frequency to be the “Prior-
ity” channel into the Memory Channel “M-001.”
2. Set the FT-897D for operation on another memory chan-
nel, or on a VFO frequency.
3. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“g”
[
SCN, PRI, DW
]
appears on the display.
4. Press the
[
B
](
PRI
)
key momentarily to start the “Prior-
ity” monitoring (the “ ” icon will appear at the upper of
the frequency display). During Priority monitoring, the
displayed frequency will shift to the
Priority memory briefly about five
seconds, while the receiver check for
the presence of a signal.
5. When no signal appears on the Priority memory (i.e. the
squelch remains closed), you can tune, transmit and re-
ceive on the VFO, or select and operate on other memo-
ries.
6. If a station you wish to talk with appears on the Priority
channel, press the PTT switch momentarily while re-
ceiving their signal (no transmission will occur) to halt
Priority scanning. Otherwise, when a signal appears on
the Priority channel, Priority monitoring will just pause
on the channel. Priority monitoring will resume.
7. To cancel Priority monitoring, press again the
[
B
](
PRI
)
key.
SCANNING OPERATION
4. Repeat steps 2 and 3 as many times as necessary to skip
all the channels you do not wish to scan.
5. Initiate memory scanning; you will observe that the chan-
nels you marked to be skipped are not included in the
scanning loop.
6. Press the PTT switch to stop the scan; you may now use
the MEM/VFO CH knob to step through the channels
manually - one at a time - and you will observe that the
“Skipped” channels are, nonetheless, available for re-
call by manual means.
7. You may restore a previously-skipped channel to the
scanning loop by selecting the channel manually, then
pressing the
[
B
](
SKIP
)
key momentarily so that the “dot”
changes to become a “hyphen.”
Memory Skip “OFF” Memory Skip “ON”
SCANNING FEATURES
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info