478500
49
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 47FT-897D OPERATING MANUAL
SPECTRUM SCOPE MONITOR / SMART SEARCH
TM
SPECTRUM SCOPE MONITOR
OPERATION
The Spectrum Scope Monitor allows viewing of operating
activity on above and below your current frequency channel
in the VFO mode, or viewing of memory channel activity
on the current memory group when in the Memory mode.
When the Spectrum Scope Monitor is activated, the display
indicates the relative signal strength on channels immedi-
ately adjacent to the current operating frequency.
Using the Spectrum Scope
1. Set the transceiver to the VFO mode in the desired band
or within the desired memory group.
2. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“h”
[
SCOP, WID, STEP
]
appears on the display.
3. Press the
[
A
](
SCOP
)
key momentarily to engage the
Spectrum Scope.
When the Spectrum Scope is in operation, the relative
signal strength of stations on channels immediately ad-
jacent to the current frequency will be indicated on the
display.
4. While the Spectrum Scope is activated in the VFO mode,
press the
[
B
](
WID
)
key to change the visible bandwidth.
Available selections are ±10 (default), ±15, and ±63 chan-
nels. Press the
[
C
](
STEP
)
key to change the channel step
resolution. Available selections are shown bellow.
Mode Channel Steps (kHz)
CW, SSB, DIG 1.0 / 2.5 / 5.0
AM 2.5 / 5.0 / 9.0 / 10.0 / 12.5 / 25.0
FM, PKT
5.0 / 6.25 / 10.0 / 12.5 / 15.0 / 20.0 /
25.0 / 50.0
While the Spectrum Scope is activated, press and hold
in the
[
B
]
key for one second to change the Sweep mode.
This allows you to switch between “Scanner sweeps just
once” and “Scanner sweeps continuously (default).”
When the Spectrum Scope mode is in the “Scanner
sweeps just once” mode press and hold in the
[
A
]
key
for one second to restart the Sweep.
While the Spectrum Scope is activated, press and hold
in the
[
C
]
key for one second to enable the “Meter peak
hold” feature.
5. To disable the Spectrum Scope, press the
[
A
](
SCOP
)
key
once more.
The receivers audio output and S-meter are dis-
abled when using the Spectrum Scope.
SMART SEARCH
OPERATION
The Smart Search
feature automatically stores frequencies
where activity is encountered on the current band. When
Smart Search
is engaged, the transceiver quickly searches
above your current frequency, storing active frequencies as
it goes (without stopping on them even momentarily). These
frequencies are stored in a special Smart Search
memory
bank, consisting of 50 memories. This feature is available
on the FM and AM modes.
The Smart Search™ feature is especially helpful when trav-
eling, as you can instantly store active FM repeater frequen-
cies without having to look up the frequencies in a reference
book.
1. Set the SQL knob to the point where background noise
is silenced. A typical setting, for effective Smart Search
operation, will be at 12 o’clock or slightly clockwise from
this position.
2. Set the VFO to the frequency on which you wish to be-
gin the search (the Smart Search
feature is available on
the VFO mode only).
3. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row “f”
[
ARTS, SRCH, PMS
]
appears on the display.
4. Now press the
[
B
](
SRCH
)
key momentarily; the blink-
ing “SRCH” indicator will appear on the LCD, and the
transceiver will sweep upward on the current band, load-
ing channels on which it encounters a signal strong
enough to open the squelch. All channels where activity
is present (up to 50 channels) will be loaded into the
Smart Search
memories.
5. Now you can turn the MEM/VFO CH knob to select
from the just-stored Smart Search
memories. If you find
frequencies you wish to store into a “regular” memory,
just follow the procedures described previously; just
don’t press the
[
B
](
SRCH
)
key while storing these memo-
ries, because this will disable Smart Search
operation.
6. To disable Smart Search
operation, press the
[
B
](
SRCH
)
key momentarily.
The Smart Search™ memories are so-called
“soft” memories; they will be lost if you initiate
a new Smart Search™ sweep of the band.
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info