478500
53
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 51FT-897D OPERATING MANUAL
OPERATION ON ALASKA EMERGENCY
FREQUENCY: 5167.5 kHz
(
U.S. V
ERSION ONLY
)
Section 97.401(d) of the regulations governing amateur ra-
dio in the United States permit emergency amateur commu-
nications on the spot frequency of 5167.5 kHz by stations in
(or within 92.6 km of) the state of Alaska. This frequency is
only to be used when the immediate safety of human life
and/or property are threatened, and is never to be used for
routine communications.
The FT-897D includes the capability for transmission and
reception on 5167.5 kHz under such emergency conditions
via the Menu system. To activate this feature:
1. Press and hold in the
[
F
]
button for one second to acti-
vate the Menu mode.
2. Rotate the MEM/VFO CH knob to select Menu Mode
No-050
[
EMERGENCY
]
.
3. Rotate the DIAL knob to select “ON.”
4. Press and hold in the
[
F
]
button for one second to exit
the Menu mode.
Emergency communication on this spot frequency is now
possible:
5. Press the V/M key, as necessary, to enter the Memory
mode, then rotate the MEM/VFO CH knob to select the
emergency channel (M-EMG), which is found between
channels M-P5U and M-001.
6. Note that the receive-mode CLARIFIER functions nor-
mally while using this frequency, but variation of the
transmit frequency is not possible. Activation of Menu
Mode No-050
[
EMERGENCY
]
does not enable any other
out-of-amateur-band capability on the transceiver. The
full specifications of the FT-897D are not necessarily
guaranteed on this frequency, but power output and re-
ceiver sensitivity should be fully satisfactory for the pur-
pose of emergency communication.
7. If you wish to disable operation capability on the Alaska
Emergency Frequency, repeat the procedure detailed
above, but set Menu Mode No-050
[
EMERGENCY
]
to
OFF” in step 3 of the procedure.
In an emergency, note that a half-wave dipole cut for this
frequency should be approximately 45’3” on each leg (90’6”
total length).Emergency operation on 5167.5 kHz is shared
with the Alaska-Fixed Service. This transceiver is not au-
thorized for operation, under the FCC’s Part 87, for aero-
nautical communications.
CW TRAINING FEATURE
The FT-897D provides a CW Training feature, which sends
random Morse Code five-character groups via the sidetone
(heard in the speaker), so you can improve your CW profi-
ciency whether or not the bands are open.
1. Press and hold in the
[
F
]
key for one second to enter the
Menu mode.
2. Rotate the MEM/VFO CH knob to select Menu Mode
No-031
[
CW TRAINING
]
.
3. Rotate the DIAL to select the Training mode:
N: Numeric characters only
A: Alphabet characters only
AN: Numeric and Alphabet characters (Mixed)
4. Press the
[
B
](
STRT
)
key to begin generation of the five-
character code groups (CW sidetone only, does not key
the transmitter).
5. When the code group is completed, code, the “Answer”
will appear on the display.
6. Press the
[
B
](
STRT
)
key to generate another code group,
as above.
7. To disable the CW Training feature, press and holding
the
[
F
]
key for one second to exit to normal operation.
You may adjust the Morse speed by the Menu
Mode No-030 [CW SPEED].
PROGRAMMING THE PANEL KEY
FUNCTIONS
The Function (
[
A
]
,
[
B
]
,
[
C
]
) keys in Multi Function Row
“q”
[
PG A, PG B, PG C
]
, may each be assigned the function
of a particular key. These may be used to create a custom set
of “hot keys” to often-used functions from other Multi Func-
tion Rows.
To assign the key functions:
1. Press and hold in the
[
F
]
button for one second to acti-
vate the Menu mode.
2. Rotate the MEM/VFO CH knob to select Menu Mode
corresponding to the key to be assigned a function (No-
065:
[
PG A
]
key, No-066:
[
PG B
]
key, No-067:
[
PG C
]
key.
3. Rotate the DIAL knob to select the feature or function
you wish to assigned to the key.
4. When you have completed the set-up, press and hold in
the
[
F
]
button for one second to exit the Menu mode.
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info