478500
47
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 45FT-897D OPERATING MANUAL
Memory Channel Recall
1. If you currently are in the VFO tuning mode, press the
V/M key once to enter the “Memory” mode (a memory
channel number “M-nnn” will appear on the display in
the space previously occupied by “VFOa” or “VFOb”).
2. To select another memory channel, turn the MEM/VFO
CH knob.
3. When your memory channels are partitioned into
Memory Groups via Menu Mode No-055
[
MEM
GROUP
]
, it is easy to change Memory Groups; press the
MEM/VFO CH knob momentarily (a Group Number
(“Ma” ~ “Mj”) will blink), then turn the MEM/VFO CH
knob to step through the channels until you enter an-
other. You may now press the MEM/VFO CH knob once
more to restrict memory channel access to the newly-
selected Group.
4. Once you are operating on a memory channel, you may
tune off of the originally-memorized frequency (as though
you were in the VFO mode). Just rotate the DIAL knob;
the “Memory Channel Number” will be replaced by one
which indicates “MTUNE,” indicating that you have now
shifted into the “Memory Tuning” mode. When operat-
ing the Memory Tuning mode, if you find another fre-
quency you wish to store into another memory channel,
just press the
[
A
](
MW
)
key momentarily, select a new
memory channel via the MEM/VFO CH knob, then press
and hold in the
[
A
](
MW
)
key until you hear the double
beep.
5. To exit the Memory Tuning mode, press the V/M key as
follows:
One touch of the V/M key returns you to the original
memory frequency.
A second touch of the V/M key will cause you to exit
the Memory mode and return to the VFO mode (the
memory channel number will be replaced by “VFOa
or “VFOb”.
When operating on a “Split” frequency
memory, a special “
+“ indication will appear
on the LCD.
Masking (“Hiding”) a Memory
Frequency data stored on a memory channel can be deleted,
if desired, from any memory channel except channel “1.”
The deletion process is not a “hard” erasure, so if you erase
a channel by mistake using this procedure, the memory chan-
nel contents can be recovered.
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“b”
[
MW, SKIP, TAG
]
appears on the display.
2. Press the
[
A
](
MW
)
key momentarily, then rotate the
MEM/VFO CH knob to select the memory channel to
be deleted.
3. Press the
[
B
](
MCLR
)
key momentarily. The frequency
display field on the LCD will go blank, and the memory
channel number will blink.
4. Wait about five seconds; when the memory channel num-
ber stops blinking, the data will now be “masked” and
will not be available for operation.
5. To restore the masked frequency data, repeat the above
steps. However, if you store new frequency information
on a channel containing masked data, the masked data
will be over-written and lost.
6. Memory Channel 1 is used for Priority operation, and
frequency information may only be over-written (not
masked) on this channel.
MEMORY OPERATION
MEMORY OPERATION ON “REGULAR” MEMORY CHANNELS
MEMORY GROUP “OFF”
M-001 ~ M-020
M-021 ~ M-040
M-041 ~ M-060
M-061 ~ M-080
M-081 ~ M-100
M-101 ~ M-120
M-121 ~ M-140
M-141 ~ M-160
M-161 ~ M-180
M-181 ~ M-200
M-P1L ~ M-P5U
MEMORY GROUP “ON”
Ma-01 ~ Ma-20
Mb-01 ~ Mb-20
Mc-01 ~ Mc-20
Md-01 ~ Md-20
Me-01 ~ Me-20
Mf-01 ~ Mf-20
Mg-01 ~ Mg-20
Mh-01 ~ Mh-20
Mi-01 ~ Mi-20
Mj-01 ~ Mj-20
Mk-1L ~ Mk-5U
MEMORY CHANNEL NUMBER
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info