478500
39
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 37FT-897D OPERATING MANUAL
TRANSMITTER OPERATION
ARTS™ Operation
The ARTS™ system uses DCS signaling to inform you when
you and another ARTS™-equipped station are within com-
munications range. This can be especially valuable during
search-and-rescue operations, as a base station can quickly
use ARTS™ to alert a field unit that it is out of range; the
field unit can then move to a better location to re-establish
communications.
ARTS™ is easy to use:
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row “f”
[
ARTS, SRCH, PMS
]
appears on the display.
2. Press the
[
A
](
ARTS
)
key to activate ARTS™ operation.
3. Your display will change to “out range” to indicate the
beginning of ARTS™ operation. Every 30 seconds, your
radio will transmit a “polling” call to the other station.
When that station responds with its return ARTS™ poll-
ing signal, your display will change to “in range” to con-
firm reception of the response.
FM TRANSMISSION
4. To cancel ARTS™ operation, press the
[
A
](
ARTS
)
key
again (the “out range” or “in range” indication will dis-
appear from the LCD).
ARTS ALERT BEEP OPTIONS
The ARTS™ feature allows two kinds of alert beeps (with
the additional option of turning them off), so as to alert you
to the current status of ARTS™ operation. Depending on
your location and the potential annoyance associated with
frequent beeps, you may choose the Beep mode which best
suits your needs. The choices are:
RANGE: The beeps are issued only when the radio first
confirms that you are within range, but does
not re-confirm with beeps thereafter.
ALL: Every time a polling transmission is received
from the other station, the alert beeps will be
heard.
OFF: No alert beeps will be heard; you must look at
the display to confirm current ARTS™ status.
To set the ARTS™ Beep mode:
1. While still in Multi Function Row “f”
[
ARTS, SRCH,
PMS
]
, press and hold the
[
A
](
ARTS
)
key for one sec-
ond. This is a “hot key” which will instantly recall Menu
Mode No-008
[
ARTS BEEP
]
.
2. Rotate the DIAL to select the desired ARTS™ Beep mode
(see above).
3. When you have made your selection, press and hold the
[
F
]
key for one second to save the new setting and exit
to normal operation.
CW Identifier Setup
The ARTS™ feature includes a CW identifier, as discussed
previously. Every ten minutes during ARTS™ operation, the
radio can be instructed to send “DE (your callsign) K” if
this feature is enabled. The callsign field may contain up to
10 characters.
Here’s how to program the CW Identifier:
1. Press and hold the
[
F
]
key for one second to enter the
Menu mode.
2. Rotate the MEM/VFO CH knob to select the Menu Mode
No-010
[
ARTS IDW
]
.
3. Press the MEM/VFO CH knob momentarily to initiate
callsign storage (the first character location of the callsign
field will be underlined.).
4. Rotate the DIAL knob to select the first letter/number of
your callsign, then rotate the MEM/VFO CH knob one
click clockwise to save the first letter/number and move
to the next entry position.
5. Repeat the previous step as many times as necessary to
complete your callsign.
6. Press the MEM/VFO CH knob momentarily to save your
completed callsign and exit.
7. Rotate the MEM/VFO CH knob one click counter-clock-
wise to select the Menu Mode No-009
[
ARTS ID
]
.
8. Rotate the DIAL to set the CW ID function to “ON.”
9. Press and hold the
[
F
]
key for one second to save the
new setting and exit to normal operation.
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info