478500
37
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 35FT-897D OPERATING MANUAL
TRANSMITTER OPERATION
Tone Search Scanning
In operating situations where you don’t know the CTCSS
tone being used by another station, you can command the
radio to listen to the incoming signal and scan in search of
the tone being used. To scan for the CTCSS tone in use:
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“e”
[
TON, -----, TDCH
]
appears on the display.
2. Press the
[
A
](
TON
)
key to activate CTCSS Encoder/De-
coder; (the “TSQ” icon will appear on the display)
3. Press the
[
C
](
TDCH
)
key to start scanning for the in-
coming CTCSS tone.
4. When the radio detects the cor-
rect tone, it will halt on that tone,
and audio will be allowed to pass
5. The CTCSS tone detected will be
stored as the “current” tone, so it may be used for memory
storage purposes, and you may now exit to normal op-
eration.
you press the
[
A
](
TON
)
key repeatedly, you will ob-
serve “TSQ” (CTCSS Encode/Decode), “DEN” (Digi-
tal Coded Squelch, Encode), followed by “DCS
(Digital Coded Squelch, Encode/Decode). One ad-
ditional press will disable all repeater-access tone
systems. See the next section for a discussion of DCS
operation.
If the default repeater access tone is not appropriate
for the repeater on which you are operating, it may
be set easily:
1. Press and hold the
[
A
](
TON
)
key for one second.
This instantly recall Menu Mode No-083
[
TONE
FREQ
]
.
2. Rotate the DIAL knob to select the desired CTCSS
frequency.
FM TRANSMISSION
3. When done, press and hold the
[
F
]
key for one
second to save the new setting and exit to normal
operation.
5. With repeater shift activated, you can temporarily re-
verse the transmit and receive frequencies by pressing
the
[
B
](
REV
)
key in the Multi Function Row “d”
[
RPT,
REV, VOX
]
. The “” icon will blink while “Reverse” shift
is activated. Press the
[
B
](
REV
)
key again to revert to
the “Normal” shift direction.
6. On many transceiver versions, the Automatic Repeater
Shift (ARS) feature is enabled at the factory. This fea-
ture automatically activates the appropriate repeater shift
when you are operating inside the designated 144 MHz
or 430 MHz FM repeater sub-bands in your country. If
you wish to change the On/Off settings for the ARS, use
Menu Mode No-002
[
144MHz ARS
]
or Menu Mode
No-003
[
430MHz ARS
]
(see page 56).
If your local repeaters need a 1750-Hz burst
tone for access (typically in Europe), press and
hold in the front panel’s
[
HOME
]
key to trans-
mit the burst tone (FM mode only).
CTCSS TONE FREQUENCY (Hz)
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4
88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9
114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8
177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5
203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info