478500
38
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 36 FT-897D OPERATING MANUAL
DCS Operation
Another form of tone access control is Digital Code Squelch,
or DCS. It is a newer, more advanced tone system that is
less susceptible to false triggering than CTCSS. A DCS En-
coder/Decoder is built into your transceiver, and operation
is very similar to that described above for CTCSS.
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“e”
[
TON, -----, TDCH
]
appears on the display.
2. Press the
[
A
](
TON
)
key four times to activate the DCS
Encoder/Decoder (the “DCS” icon will appear on the
display). The receiver will remain muted until a match-
ing DCS code is received on an incoming signal.
3. Press and hold in the
[
B
]
key for one second. This in-
stantly recalls Menu Mode No-033
[
DCS CODE
]
.
4. Rotate the DIAL to select the desired DCS code, then
press and hold in the
[
F
]
key for one second to save new
setting and exit to normal operation.
FM TRANSMISSION
TRANSMITTER OPERATION
Split Tone Operation
The FT-897D can be configured in a “Split Tone” configu-
ration via the Menu mode.
This allows you to encode a CTCSS Tone, decode a DCS
code, encode (only) a DCS code, etc.
1. Press and hold in the
[
F
]
key for one second to enter the
Menu mode.
2. Rotate the MEM/VFO CH knob to select Menu Mode
No-079
[
SPLIT TONE
]
.
3. Rotate the DIAL knob to select “ON” (to enable the Split
Tone feature).
4. Press and hold in the
[
F
]
key for one second to save the
new setting and exit to normal operation.
When the Split Tone feature is activated, the Multi Function
Row “e” selection changes to
[
ENC, DEC, TDCH
]
. So, you
can set the desired encoder (by pressing
[
A
](
ENC
)
key, re-
peatedly, if necessary) and decoder (by pressing the
[
B
](
DEC
)
key) separately.
When the Split Tone feature is activated, you can see the
following additional parameters.
T-T:Encodes a CTCSS Tone and Decodes a CTCSS Tone
T-D:Encodes a CTCSS Tone and Decodes a DCS Code
T :CTCSS Tone Encode only
D :DCS Encode only
D-T :Encodes a DCS Code and Decodes a CTCSS Tone
D-D:Encodes a DCS Code and Decodes a DCS Code
D:DCS Decode only
T :CTCSS Tone Decode only
Split Tone Frequency or DCS Code Setup
1. Press and hold in the
[
A
](
ENC
)(if you use CTCSS)
or
[
B
](
DEC
)(if you use DCS)
key for one second. This in-
stantly recalls Menu Mode No-083
[
TONE FREQ
]
or No-
033
[
DCS CODE
]
.
2. Press the MEM/VFO CH knob momentarily, then rotate
the DIAL knob to select the “R” option. This is the tone
you Receive, i.e. the “Decode” tone.
3. Rotate the DIAL knob to select the desired Decode
CTCSS frequency (or DCS code).
4. Press the MEM/VFO CH knob momentarily, then rotate
the DIAL knob to select the “T” option. This is the tone
you Transmit, i.e. the “Encode” tone.
5. Rotate the DIAL knob to select the desired Encode
CTCSS frequency (or DCS code).
6. Press and hold in the
[
F
]
key for one second to save the
new setting and exit to normal operation.
5. Press the
[
A
](
TON
)
key once to cancel DCS operation
(the “DCS” icon will disappear).
DCS Search Scanning
In operating situations where you don’t know the DCS code
being used by another station, you can command the radio
to listen to the incoming signal and scan in search of the
code being used.
To scan for the DCS code in use:
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“e”
[
TON, -----, TDCH
]
appears on the display.
2. Press the
[
A
](
TON
)
key to activate DCS (the “DCS” icon
will appear on the display).
3. Press the
[
C
](
TDCH
)
key to start scanning for the in-
coming DCS code.
4. When the radio detects the cor-
rect DCS code, it will halt on that
code, and audio will be allowed
to pass.
5. The DCS code detected will be stored as the “current”
code, so it may be used for memory storage purposes,
and you may now exit to normal operation.
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info