622294
8
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
DVM68
25.02.2011
8
Notes:
For DC-measurements: when a negative
polarity is present at the red test lead, the
indicated value is preceded by a “-” sign.
When the measured value is higher than the selected range limit, the display will show
“OL”. Select a higher range.
7.2 Current measurements
Do not measure current in circuits with voltages > 250V
Current measurements:
µA
mA jack max.
3
00mA; for measurements up to 10A use the
10A jack. When measuring currents above 5A, max. 15s continu
ous measurement followed
by a 10 minutes break between 2 measurements.
Alway
s be careful when working with voltages above 60Vdc or 30Vac rms. Keep your
fingers behind the probe barriers at all times during measurement.
For measurements up to 300mA: connect the red test lead to the "
µA
black lead to the "COM" jack.
For measurements up to 10A: connect the red test lead to the "
10A
lead to the "COM" jack.
Set the function selector to A for measurements up to 10A
on the 10A jack.
Set the function selector to mA or µA for measurements up to 3
00mA
When the range is unknown, always select the highest possible range and lower to the
appropriate range.
Connect the test probes in series with the circuit.
Read the measured value from the display.
When desired, select a range manually with the RANGE button.
Notes:
For DC-
current measurements, when a negative polarity is present at the red test lead,
the indicated value is preceded by a “-” sign.
The µAmA-range is protected against over-current with a F300mA
25
the 10A-range is protected against over-current with a F10A 25
0V fuse
When measuring above 5A, max. 15s continu
ous measurement followed by a 10
break between 2 measurements.
When the measured value is higher than the selected range li
mit, the display will show
“OL”. Select a higher range.
7.3 Resistance measurements
Do not perform resistance measurements on live circuits.
Make sure all capacitors in the circuit are discharged.
Connect the red test lead to the "VΩF" jack and the
black lead to the "
Set the rotary switch to the range.
Connect the test probes to the circuit/component under test.
The measured value appears on the display.
When desired, select a range manually with the RANGE button.
Notes:
o Never perform
resistance measurements on a live circuit and make sure all capacitors are
completely discharged.
o For resistance measurements above 3.26M
Ω the meter needs a few seconds to stabilize the
read-out.
o Should the measured resistance exceed the selected range or
in case of an open c
display will show “OL”.
7.4 Continuity & diode test
Do not perform continuity or diode measurements on live circuits.
Make sure all capacitors in the circuit are discharged.
Connect the black test lead to the COM
jack and the red test lead to the
Set the rotary selector to / .
Rev. 01
©Velleman nv
polarity is present at the red test lead, the
When the measured value is higher than the selected range limit, the display will show
00mA; for measurements up to 10A use the
ous measurement followed
s be careful when working with voltages above 60Vdc or 30Vac rms. Keep your
µA
mA" jack and the
10A
" jack and the black
on the 10A jack.
00mA
on the µAmA jack.
When the range is unknown, always select the highest possible range and lower to the
current measurements, when a negative polarity is present at the red test lead,
25
0V fuse (Ø5x20mm),
0V fuse
(Ø6.3x30mm).
ous measurement followed by a 10
minutes
mit, the display will show
black lead to the "
COM" jack.
resistance measurements on a live circuit and make sure all capacitors are
Ω the meter needs a few seconds to stabilize the
in case of an open c
ircuit, the
Do not perform continuity or diode measurements on live circuits.
jack and the red test lead to the
VΩF jack.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velleman DVM68 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velleman DVM68 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info