622294
10
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
DVM68
25.02.2011
10
7.6 Transistor Test
Do not perform transistor measurements on live circuits.
Set the function switch at hFE position.
Identify whether the transistor is NPN or PNP type and locate emitter, base and collector lead.
Insert leads of the transistor to be tested into proper holes of the testing socket on the front
panel.
LCD display will show the approximate hFE value at the
test condition of base current 10 µA
and Vce 3.2V.
8. Cleaning and maintenance
Do not
replace internal parts yourself. Replace damaged or lost accessories by identical
ones with the same specifications. Order spare accessories e.g. test probes at your deale
Switch off the meter and remove test leads
prior to replacing the battery or fuses.
WARNING:
To avoid electrical shock
always
disconnect the test leads prior to opening
the housing.
Remark: refer to the warning on the back of the meter
a. General mainenance:
Wipe the device regularly with a moist, lint-
free cloth. Do not use alcohol or solvents.
b. Fuse Replacement
Remove test probes from the circuit under test. Remove the test probes from the input jacks.
Switch off the multi-meter.
Remove the 3 screws at the back and gently open the meter.
Remove the fuse from the fuse holder and replace it with a new fuse of the same type and
with the same specifications (F300mA/250V, Ø5x20mm – F10A/25
0V, Ø6
Close the meter carefully.
c. Battery Replacement
Remove the battery as soon as the “
” indication appears on the display.
Remove test probes from the circuit under test. Remove all test leads
from the input jacks.
Switch off the multi-meter.
Remove the 3 screws at the back and gently open the meter.
Replace the battery by a new battery of the same type and with the same specifications
(6LR61/6F22 9V alkaline, do not use rechargeable batteries)
Close the meter carefully
Notes:
o Never open the housing when test leads are connected to the
input jacks
o
Do not try to repair or calibrate the meter yourself; contact your dealer.
o
Replace damaged accessories immediately; order them at your local dealer.
o Do not use the meter when it is damaged.
9. Technical specifications
This device is not calibrated when purchased!
Regulations concerning environment of use:
Use this meter only for measurements in CAT I, CAT II and CAT III
environments (see §4)
Use this meter only in a pollution degree 2 environment (see §5)
Max. voltage between terminal and earth
1000V DC or 750V AC rms (sinus)
Display
3 ¾ digit LCD, 3260 counts max,
2-3 readings / sec
Fuse protection
µA & mA range : F 300mA/250V
A range : F 10A/250V
Power Supply
9V battery
Ranging method
Auto / Manual
Polarity indication
"
-
" displayed
Rev. 01
©Velleman nv
Identify whether the transistor is NPN or PNP type and locate emitter, base and collector lead.
Insert leads of the transistor to be tested into proper holes of the testing socket on the front
test condition of base current 10 µA
replace internal parts yourself. Replace damaged or lost accessories by identical
ones with the same specifications. Order spare accessories e.g. test probes at your deale
r.
prior to replacing the battery or fuses.
disconnect the test leads prior to opening
free cloth. Do not use alcohol or solvents.
Remove test probes from the circuit under test. Remove the test probes from the input jacks.
Remove the fuse from the fuse holder and replace it with a new fuse of the same type and
0V, Ø6
.3x30mm).
” indication appears on the display.
from the input jacks.
Replace the battery by a new battery of the same type and with the same specifications
input jacks
.
Do not try to repair or calibrate the meter yourself; contact your dealer.
Replace damaged accessories immediately; order them at your local dealer.
environments (see §4)
1000V DC or 750V AC rms (sinus)
3 ¾ digit LCD, 3260 counts max,
µA & mA range : F 300mA/250V
A range : F 10A/250V
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velleman DVM68 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velleman DVM68 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info