557217
10
Verklein
Vergroot
Pagina terug
1/89
Pagina verder
OPERATION
NOISE BUILD-UP
Noise (sound pressure level) in the workplace can exceed
85 dB (A). In this case, sound insulation and hearing
protection measures must be taken by the operator.
MOUNTING AND REMOVING THE BIT (Fig. 1)
MOUNTING
Slide the sleeve of the bit holder forward.
Insert the bit into the bit holder as far as it will go.
Release the sleeve.
Confirm that the bit is secured by pulling it forward.
REMOVING
Slide the sleeve forward.
Pull the bit out.
Release the sleeve.
CAUTION
Use a bit that matches the screw or bolt to be
driven.
CAUTION
Do not use a damaged bit.
SWITCH
This tool is started and stopped by squeezing and
releasing the trigger.
The rotation speed is variable from 0 through 2400 min
-1
by controlling the trigger-squeezing force.
CHANGING THE ROTATION DIRECTION (Fig. 2)
To change the rotation direction, stop the tool and
push the reversing switch to the opposite side.
When the reversing switch is pushed in from the
right side, the bit rotates clockwise when viewed from
the handle end of the tool.
When the reversing switch is pushed in from the left
side, the bit rotates counterclockwise.
The trigger can be locked by positioning the reversing
switch in the middle.
Lock the trigger whenever the tool is not in use.
FASTENING TORQUE
The proper fastening torque differs depending on the kind
and size of the screw and the type of the material to
be fastened.
Note: To avoid the reduction of the fastening torque,
keep the battery properly charged.
The fastening torque is affected by the following
factors:
VOLTAGE
When the battery is almost discharged, the voltage will
drop and the fastening torque will be reduced.
FASTENING TIME
If the fastening time is prolonged, the fastening torque
will be increased.
However, if the fastening torque reaches the maximum,
it will not increase any more.
SCREW AND BOLT
Even though the torque coefficient and class of the
screws or bolts are the same, the fastening torque will
differ according to their diameters. Generally, the larger
the diameter, the higher the fastening torque.
On the other hand, even though the diameter of the bolts
or screws are the same, the fastening torque will
differ according to the torque coefficient, their class and
their length.
BIT
Failure to use the correct size bit causes a reduction in
the fastening torque.
SWITCH
The rotation speed and the fastening torque can be
adjusted by controlling the trigger-squeezing force. The
lower the rotation speed, the lower the fastening torque.
WARNING
A battery short-circuit can cause a large current
flow, overheating, burns and even a breakdown.
Do not touch the terminals with any conductive
materials.
Avoid storing the battery in a container with other
metal objects such as nails, coins, etc.
Do not expose the battery to water or rain.
7
GB
English
F D E I P NL S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
BID-1801M_20 lgs 19/07/05 11:38 Page 7
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ryobi BID-1801M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ryobi BID-1801M in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info