561578
78
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
COCKPIT SX
Page 76
18.5. Erasing model memories
Menu: (
MEMO) DELETE
A model memory can only be used for setting up a new
model, or as destination for a copy, if its contents are
first erased.
Moving to the DELETE menu:
4 to MENU, r (SETUP appears),
3 to MEMO, r (GO TO appears),
3 to DELETE, r (0 flashes)
Current memory Selected for erasing
Use the 3-D digi-adjustor to select the model memory
which is to be erased. A brief press r on the 3-D digi-
adjustor carries out the erasure, and takes you back to
the DELETE menu.
Notes:
Only memories containing model data are offered
for erasure.
Select DELETE = 0 to delete no
memory
If you select 0 with the 3-D digi-adjustor, then confirm
your choice with a brief press r, no data will be
erased, and you are returned to the COPY menu.
You cannot erase the current memory
When you are leafing through, the number of the cur-
rent memory is not offered.
Concluding with a long press ª
This is an alternative method of concluding the pro-
cess without erasing data (wait for the confirmation
beep). In this case you are returned to the INFO 1
display.
19. Timers 1 and 2, operating time
The two timers of the COCKPIT SX can be used for the
following purposes:
TIMER 1 Î 19.1.
START = 00:00 timer runs forward (up)
START = xx:xx timer runs backward (down)
Switch, alarm, mm:ss, range
TIMER 2 Î 19.2.
runs up only, switch-operated only, hh:mm, range
OPERATING HOURS Î 19.5.
hh:mm, range
19.1. Timer 1
Probably the most common use of timers is for re-
cording the length of the motor run. In the C
OCKPIT SX
Timer 1 can be used for this, controlled by the
THROTTLE control (stick or slider).
Two operating modes are available:
a. The timer starts at 00:00 and continues to count
upward as long as the THROTTLE control is
above the selected switching threshold.
b. The timer is first set to the available motor run time
(dictated by the battery capacity / fueltank capac-
ity). As long as the THROTTLE control is above
the selected switching threshold, Timer 1 runs
downward. When 30 sec. and 20 sec. remain, you
will hear a triple / double beep. With ten seconds
to go, an alarm sounds every second. The timer
emits a trill when the pre-selected time is finished
(timer passes through zero) (Î 19.1.2.).
19.1.1. Assigning a switch
Menu: (
TIMER) T1 SW
Moving to the T1 SW menu:
4 to MENU, r (SETUP appears),
3 to TIMER, r (START1 appears),
3 to T1 SW r
No switch Switch 5 (THROTTLE)
Move the transmitter control for throttle (stick or right-
hand slider according to the set stick mode) to and fro
quickly until the code number 5 appears. The hyphen
(marker) following the colon indicates the switching
threshold you have selected.
Switch 5 Marker Switching threshold
Now move the THROTTLE control until the marker is
adjacent to the switching threshold you wish to use.
A brief press r on the 3-D digi-adjustor concludes the
process. The flashing ceases, and the setting is stored.
19.1.2. Operating Timer 1 with an alarm
Menu: (
TIMER) START1
If you set Timer 1 to count down, and if you want the
transmitter to emit an audible alarm when the set time
has elapsed, a start time must be set for this timer.
If you leave the start time at 00:00, Timer 1 runs up-
ward, and no alarm function is available.
70%
35%
15%
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Multiplex COCKPIT SX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Multiplex COCKPIT SX in de taal/talen: Engels als bijlage per email.

De handleiding is 1,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Multiplex COCKPIT SX

Multiplex COCKPIT SX Gebruiksaanwijzing - Nederlands - 17 pagina's

Multiplex COCKPIT SX Gebruiksaanwijzing - Nederlands - 149 pagina's

Multiplex COCKPIT SX Gebruiksaanwijzing - Deutsch - 83 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info