554884
8
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
JA-60GSM dialer module 8 / 11 MFJ51215
5.13 Sustain calls for prepaid SIM cards
If a prepaid card is used, the dialer can automatically perform a sustain
call if there were no calls within a 3 month period. It will dial the
programmed number and after a 10 second call duration, the dialer will
hang up. The number, which should be called, can be entered by:
973 xxxxxxxx F0
where: xxxxxxx is the telephone number (max. 20 digits) – it is
recommended to call a time check service, weather reports etc.
5.14 Prepaid SIM cards
The JA-60GSM communicator can send information about the credit
balance of a prepaid SIM card. An SMS sent from any of the stored
numbers (sequence 7t...) containing the word CREDIT followed by the
correct command (different for every provider) will result in sending
information about the credit. Please ask your mobile phone provider for
more information.
CREDIT xxxxx where xxxxx is a string, which depends on the
GSM provider. Ask your provider for more
details
If you want to check the credit regularly use the following sequence.
CREDIT uuu..u xx yyy zz
where: uuu…u is the GSM-provider-defined instruction to be
transmitted to the provider for receiving information about the
amount of credit
xx is the time period (in days) between credit checks.
yyy is the minimum acceptable level of credit. A value
lower than this threshold triggers a warning SMS.
zz is an index or pointer, measured in characters from
the start of the provider message, showing the
position of the first digit of the credit value in the
information SMS sent by the provider. This allows the
GSM dialer to extract the credit value.
If the credit level is lower than the set value (yyy) the event “battery
discharged GSM communicator” will be sent to the preset telephone
numbers. If the credit is restored the event “battery OK GSM
communicator” will be sent to the preset telephone numbers. To
disable this function set the time (xx) period to 00.
Note:
The user is responsible for the level of the credit
The producer does not recommend the use of prepaid
cards.
When automatic credit checking is set to disabled, the user will be
unaware of expired credit. . Many GSM providers also demand regular
credit recharging. Therefore a prepaid SIM card is not recommended.
5.15 Telephone volume
The volume and sensitivity of the attached telephone can be adjusted
by:
974x receiver volume
975x microphone sensitivity
where x can be from 1 to 9 (factory default is 5 for both)
If the system is in programming mode, the volume can be adjusted
during a phone call.
5.16 GPRS communication setting
GPRS can be used for communication with a www server, for
connecting a PC to the internet or for communication with a CMS.
GPRS must be activated on the SIM card (for detailed information ask
your GSM provider). It is also necessary to set the APN in
programming mode in the communicator using ComLink software.
5.17 GSM module reset
Enter 976 to disconnect and connect the GSM module to the GSM
network. This function is useful when it is necessary to switch the
mobile device off and on (e.g. when the SIM card has been unblocked
by the mobile operator).
It is also possible to send the command via SMS in the form yyyyy*GSM,
where yyyyy is service access code. The command is processed
independent of the state of the system.
5.18 Language setting
Language of the text used by the communicator can be set by
instruction:
977 xx
where:
xx is number of the language – see the following list:
01 EN English 09 PL Polish
02 CZ Czech 10 PT Portuguese
03 SK Slovak 11 RU Russian
04 DA Danish 12 SE Swedish
05 FI Finnish 13 TR Turkish
06 DE German 14 ES Spanish
07 HU Hungarian 15 NL Dutch
08 IT Italian 16 CN Chinese
Note:
Set the language before editing the text in the system (change of
the language will change the text to the factory default).
Set language will not be changed when reset is performed.
Language setting can NOT be performed via the ComLink
software or the GSMLink.
This feature is only available for communicators equipped with
SW version FJ61412 or higher.
Do not use *.jag files for language setting.
Example: by setting 97702 the Czech language will be set.
Factory default : 97701 = English
6 Web server remote access
6.1 System programming
The GSMLink server allows a user/installer to read and change the
control panel and dialer configurations. Data transfer is achieved by
sending an SMS or GRPS data. The web site allows the following
programming:
control panel settings
dialer settings
editing of SMS reports
monitoring station settings
The web site is also able to read the event memory of the control
panel. The amount of data sent by SMS is optimized to minimize costs.
Alternatively GPRS data transfer can be used, but this must be
activated on the SIM card.
6.2 Web site registration
System registration can be performed in two ways:
The www.gsmlink.cz website
– to register your system use the
registration code printed on the warranty certificate (the code has a
form xxxx-xxxxx-xxxx and it is a unique for each system). The dashes
(-) must be included when registering.
By mobile phone – when the alarm system is in programming mode,
enter 972 xxxx F0 on the alarm system keypad (xxxxx is your mobile
phone number). After a moment you will receive an SMS with the
registration code and the system will register on the web server.
7 Central Monitoring Station communication settings
The dialer can report events to two different Central Monitoring
Stations (CMS). Each CMS has its own setting sequences that differ in
parameter p (p=1 for CMS1 and p=2 for CMS2). The dialer uses
Ademco Contact ID format and it is also equipped for the future use of
GPRS data transfers. The product is able to report events to a CMS
based on either landline or GSM data transfer.
7.1 CMS phone number entry
Primary and back up telephone numbers can be entered for each CMS:
Primary number: 01 p xx....x F0
Back up number:
02 p xx....x F0
where:
xxx...x is a telephone number, max. 20 digits
p 1=CMS1, 2=CMS2
Example: 123456789 can be entered as the CMS2 primary number by
entering: 01 2 123456789 F0
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-60GSM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-60GSM in de taal/talen: Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-60GSM

Jablotron JA-60GSM Gebruiksaanwijzing - English - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info