572349
36
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
For models with no fault
display, the washing machine
stops in the appropriate
programme step.
First switch the washing
machine off and on again to
continue with the programme.
If the fault persists, please
contact After Sales Service (see
After Sales Service).
d.
Water Stop fault
(if
fitted)
The Water Stop fault may
have been triggered by:
1.Excess foaming.
2.A leak in the washing
machine.
In this case the pump is
switched on automatically in
order to pump the water out.
For models with a fault display,
the Water Stop display lights
up, an acoustic signal sounds
and the spin speed indicator
lights flash. If a digital display is
fitted, A
 and F are also
displayed alternately.
For models with no fault
display, the washing machine
stops in the appropriate
programme step.
Switch the appliance off, pull
out the mains plug and turn the
water tap off.
Tilt the appliance forwards
carefully to allow the collected
water to flow out from the
bottom of the appliance.
Then:
1.Plug in the appliance.
2.Turn the water tap on (if water
immediately flows into the
appliance again, without the
appliance being started, there
is a fault. Turn off the tap and
notify After Sales Service).
3.For models with fault display,
select and start the desired
programme again.
For models with no fault
display, continue the
programme by pressing the
On/Off button again.
If the fault occurs again, please
contact After Sales Service (see
After Sales Service).
Water Stop fault, when
the programme selector is
in the position.
The pump is switched on
automatically in order to pump
the water out.
For models with fault display
the washing machine will also
detect a Water Stop fault (leak)
if the programme selector is in
the  position. In this case
an acoustic signal sounds and
the digital display (if fitted)
displays A
 and F
alternately.
For models with no fault
display, the Water Stop fault
is detected when the appliance
is switched on again.
Pull the mains plug out and
ensure that the water tap is
turned off.
Tilt the appliance forwards
carefully to allow the collected
water to flow out.
Then:
1.Plug in the appliance.
2.Turn the water tap on (if
water immediately flows into
the appliance again, without
the appliance being started,
there is a fault. Turn the tap
off and notify After Sales
Service).
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht WA 89890 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht WA 89890 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht WA 89890

Bauknecht WA 89890 Gebruiksaanwijzing - Deutsch - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info