572349
35
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Fault indicators
a.
Fault in the water supply
The appliance has no or
insufficient water supply.
For models with a fault display,
the display
Tap Off
lights up,
an acoustic signal sounds and the
spin speed indicator lights flash. If
a digital display is fitted, H
 and
F
 are also displayed alternately.
For models with no fault
display, the washing machine
stops in the appropriate
programme step.
Switch the appliance off and
pull out the mains plug.
Check whether:
The water tap is fully turned
on, and the water supply
pressure is sufficient.
The water inlet hose is kinked.
The water connection mesh
filters are blocked (see Care
and Maintenance/Water hose
mesh filter).
The water supply hose is
frozen up.
The washing machine has a
safety hose and the safety
valve is open (red indicator in
the safety valve inspection
window); In this case replace
it with a new safety hose.
Reconnect the appliance to the
electrical socket.
For models with a fault display,
reselect the desired programme
and start it.
For models without a fault
display continue the
programme by pressing the
On/Off button again.
If the fault occurs again, please
contact After Sales Service (see
After Sales Service).
b.
Draining fault
Waste water not pumped out.
For models with a fault display, an
acoustic signal sounds and the
spin speed indicator lights flash. If
a digital display is fitted, P
 and
F
 are also displayed alternately.
For models with no fault
display, the washing machine
stops in the appropriate
programme step.
Switch the appliance off and
pull out the mains plug.
Check whether:
The drain hose is kinked (see
Installation/Connect the
water drain hose);
The pump or the filter is
blocked (see Removing the
Filter);
IMPORTANT:
Before
draining, make sure that the
water has cooled down.
The water in the drain hose is
frozen up.
Reconnect the appliance to the
electrical socket.
For models with fault display,
select and start the Drain/
Cancel programme.
To rinse the laundry, we then
recommend a short programme
without the addition of
detergent.
For models without fault
display, continue the
programme by pressing the
On/Off button again.
If the fault occurs again, please
contact After Sales Service (see
After Sales Service).
c.
Fault in an electrical
component
The appliance stops in the
middle of a programme.
For models with a fault display,
an acoustic signal sounds and
the spin speed indicator lights
flash. If a digital display is
fitted, F4
 to F16 are also
displayed.
Switch the washing machine
off. First of all select and start
the Drain/Cancel
programme.
Then select and start the
desired programme again.
Luminous
display
Acoustic
signal
Spin
speed
lights
Digital display
(if fitted)
Fault description
Water tap 30 sec flash H and F Fault in water supply
- 30 sec flash P and F Fault when draining
- 30 sec flash from F4 to F16 Fault in an electrical component
Water Stop 30 sec flash A and F Water Stop fault
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bauknecht WA 89890 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bauknecht WA 89890 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Bauknecht WA 89890

Bauknecht WA 89890 Gebruiksaanwijzing - Deutsch - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info