533793
2
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
Usage and safety precautions
1
Usage and safety precautions
In this manual, symbols are used to highlight warnings and
cautions for you to read so that accidents can be prevented.
The meanings of these symbols are as follows:
Please observe the following safety tips and precautions to ensure
hazard-free use of the R16.
Power requirements
Since power consumption of this unit is fairly high, we
recommend the use of an AC adapter whenever possible.
If you use batteries, use either alkaline or nickel-metal
hydride batteries.
AC adapter operation
Be sure to use only a DC5V/1A/center plus AC adapter
(ZOOM AD-14). Use of an adapter other than that
specified could damage the unit and pose a safety hazard.
Connect the AC adapter only to an AC outlet that
supplies the rated voltage required by the adapter.
When disconnecting the AC adapter from the AC outlet,
always grasp the adapter itself and do not pull on the
cable.
During lightning or when not using the unit for an
extended period, disconnect the AC adapter from the
AC outlet.
Battery operation
Use six conventional size AA-1.5 volt batteries.
The R16 cannot be used for recharging. Pay close
attention to the labeling of the batteries to make sure
you choose the correct ones.
When not using the unit for an extended period, remove
the batteries from the unit.
If battery leakage has occurred, wipe the battery
compartment and the battery terminals carefully to remove
all remnants of battery fluid.
While using the unit, the battery compartment cover
should be closed.
About grounding
Depending on installation conditions, a slight electrical
charge may be felt when touching a metal part of the
R16. If you wish to avoid this, ground the unit by connecting
the ground screw on the rear panel to a good external
ground.
To prevent the risk of accidents, never use any of the
following for grounding:
Water pipes (risk of electric shock)
Gas pipe (risk of explosion)
Telephone wiring ground or lightning arrestor
(risk of lightning strike)
Environment
Avoid using your R16 where it will be exposed to:
Extreme temperature
High humidity, moisture, or splashing water
Excessive dust or sand
Excessive vibration or shock
Handling
Never place objects filled with liquids, such as vases, on
the R16 since this can cause electric shock.
The R16 is a precision instrument. Do not exert undue
pressure on the keys and other controls. Also take care
not to drop the unit, and do not subject it to shock or
excessive pressure.
Connecting cables and input and output jacks
You should always turn off the power to the R16 and all
other equipment before connecting or disconnecting
any cables. Also make sure to disconnect all connection
cables and the power cord before moving the R16.
Alterations
Never open the R16 case or attempt to modify the product
in any way since this can result in damage to the unit.
Volume
Do not use the R16 at a loud volume for a long time since
this could cause hearing impairment.
Electrical interference
For safety considerations, the R16 has been designed to provide
maximum protection against the emission of electromagnetic
radiation from inside the device, and protection from external
interference. However, equipment that is very susceptible to
interference or that emits powerful electromagnetic waves should
not be placed near the R16, as the possibility of interference
cannot be ruled out entirely.
With any type of digital control device, the R16 included,
electromagnetic interference could cause malfunction and could
corrupt or destroy data. Care should be taken to minimize the risk
of damage.
Cleaning
Use a soft, dry cloth to clean the R16. If necessary, slightly
moisten the cloth. Do not use abrasive cleanser, wax, or solvents
(such as paint thinner or cleaning alcohol), since these may dull
the finish or damage the surface.
Back up
The data on the R16 could be lost because of malfunction or
incorrect operation. Back-up your data.
Copyrights
Except for personal use, unauthorized recording from
copyrighted sources (CDs, records, tapes, video clips,
broadcast material and so on) is prohibited.
ZOOM Corporation does not bear any liability for injunctions
regarding copyright law infringement.
The SD symbol and SDHC symbol are trademarks.
Windows®/Windows Vista® are trademarks or registered
trademarks of Microsoft®.
Macintosh® and Mac OS® are
trademarks or registered trademarks of Apple Inc.
Steinberg and
Cubase are trademarks or registered trademarks of Steinberg Media
Technologies GmbH Inc.
Intel® and Pentiuare trademarks or
registered trademarks of Intel® Corporation.
AMD Athlon™ is a
trademark or registered trademark of Advanced Micro Devices, Inc.
All other trademarks, product names, and company names mentioned
in this documentation are the property of their respective owners. All
trademarks and registered trademarks mentioned in this manual are
for identification purposes only and are not intended to infringe on the
copyrighted properties of their respective owners.
This symbol indicates explanations about extremely
dangerous matters. If users ignore this symbol and
handle the device the wrong way, serious injury or
death could result.
This symbol indicates explanations about dangerous
matters. If users ignore this symbol and handle the
device the wrong way, bodily injury and damage to
the equipment could result.
SAFETY PRECAUTIONS
Usage Precautions
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Zoom-R16

Zoeken resetten

  • Graag zou ik een nederlandse handleiding willen van de zoom r16 en r24,en in de vragen te zien nog andere gebruikers ook.
    Als jullie ons daar aan zouden kunnen helpen zou dat erg fijn zijn omdat engels en duits niet makkelijk is in audio taal. best technisch allemaal.
    met vriendelijke dank. Gesteld op 9-2-2015 om 15:57

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik een opgenomen track wissen? Als ik zingend een vorige opname wil overwriten dan hoor ik de vorige opname er hinderlijk doorheen Gesteld op 25-11-2014 om 11:49

    Reageer op deze vraag Misbruik melden
    • Hallo, misschien heb je ondertussen al je antwoord, maar hier toch mijn antwoord op je vraag. Als je een opname maakt dan wordt dat een file. Die file kun je wissen door naar 'project' te gaan. Klik dus op het knopje rechtsboven op de Zoom bij 'project'. Daar kun je naar 'File' gaan en dan kun je alle opgenomen files van dat project zien. Je kunt ze ook beluisteren als je niet zeker weet welke het is. Vervolgens kun je de file wissen. Succes! Geantwoord op 9-2-2015 om 16:05

      Waardeer dit antwoord (1) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zoom R16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zoom R16 in de taal/talen: Engels als bijlage per email.

De handleiding is 33,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Zoom R16

Zoom R16 Gebruiksaanwijzing - Deutsch - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info