647898
15
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Beep
The MVT-7100 sounds a beep tone each time a key is pressed. This helps to provide audible feedback
during radio operations. Shipped from the factory, the beep tone is enabled which can be verified by the
presence of the BEEP indicator. For more discreet operations, it may be necessary to disable this feature.
To disable the beep tone
1. Press FUNC2 + BEEP
2. The BEEP indicator disappears
To enable the beep tone
1. Press FUNC2 + BEEP
2. The BEEP indicator appears
Delay
During a scan or search operation, after a transmission ends, there will be a two second delay before the
scan/search is resumed. This delay allows for a response to be heard. To increase this delay time to four
seconds, the Delay function is used.
To enable Delay
1. Press FUNC + DELAY
2. The DLY indicator appears
To disable Delay
1. Press FUNC + DELAY
2. The DLY indicator disappears
Lamp
The MVT-7100 contains a brilliant backlighting system which is used to illuminate both the display and
keypad for night time operations.
On the MVT-7100, the LAMP button must be pressed and held to activate the backlight. When the buttons
is released, the backlight turns off.
The MVT-7200 comes with a switch that can be used to keep the backlight on if so desired.
NOTE : Excessive use of the Lamp feature will dramatically reduce the operational time of the radio when
batteries are being used.
Monitor
The MONI button on the side of the radio is used it immediately open the squelch to help aid in the
reception of signals whose strength might be below the squelch threshold or for monitoring weak signals
which are fading in and out resulting in repetitive squelch operations.
Reset
The MVT-7100 has a reset feature that allows the processor to be reset should the radio act peculiar. Using
this feature effectively restores the radio to the condition it was in when it left the factory.
ALL MEMORY DATA WILL BE ERASED! ALL SEARCH BANDS AND VFO SETTINGS WILL BE RESET TO
THEIR DEFAULT VALUES!
To perform the reset
1. Make sure the radio is powered on
2. Use a small object to press and hold the micro switch located beneath the small opening on the side
panel
3. The radio will reset and then go to VFO mode
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yupiteru MVT-7100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yupiteru MVT-7100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Yupiteru MVT-7100

Yupiteru MVT-7100 Gebruiksaanwijzing - Nederlands - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info