647898
14
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Scan Pass
The priority channel can not be passed.
Other Features
AM Antenna
To aid in the reception of medium wave (540-1710kHz) broadcasts, the MVT-7200 is equipped with an
internal ferrite bar antenna that is used in lieu of the stock antenna for this band.
The MVT-7100 must use the antenna attached to the BNC connector for medium wave band received.
Attenuator
If the radio is used in an area where excessively strong signals are active, it may be necessary to reduce
their strength to ensure that the radio receiver functions properly. The Attenuator is used to reduce the
strength of signals entering into the receiver.
Signals that enter the radio and are too powerful for it to handle, may result in various forms of interference.
Such signals may affect frequencies to either side or can even desensitise the receiver so that it may not be
able to receive signals it normally can.
To enable the Attenuator
1. Press FUNC + ATT
2. The ATT indicator appears
To disable the Attenuator
1. Press FUNC + ATT
2. The ATT indicator disappears
The VFO has its own attenuator setting as well as each memory channel. After a search band search
operation is started, the Attenuator can be enabled or disabled as is deemed necessary.
Battery Saver
To extend the operating time of the radio, the Battery Saver feature is used. Not only can this feature be
enabled or disabled upon request, the amount of time the saver circuitry is active can be selected.
Three of the numeric keys are used to specify the battery saver level
1 = sleep for 0.3 seconds out of every 0.6 seconds
2 = sleep for 0.9 seconds out of every 1.2 seconds
3 = sleep for 1.5 seconds out of every 1.8 seconds
To enable the Battery Saver
1. Press 1, 2 or 3
2. Press FUNC + SAVE
3. SAVE appears on the LCD with 1, 2 or 3
NOTE: If step #1 is skipped, a value of 1 is assumed
To disable the Battery Saver
1. Press FUNC + SAVE
2. SAVE disappears
The Battery Saver is only effective when used in VFO or Memory modes. If no transmission is detected on
the displayed frequency within five seconds, the Battery Saver is engaged.
Once engaged, the Battery Saver puts the radio “to sleep” for a period of time, then “wakes up” briefly to
check for an active transmission. The amount of time the radio spends “sleeping” can be selected. While
the radio is “asleep”, power usage is lowered thus saving battery power. The longer the sleep time, the
more power is saved and the longer the batteries will last.
NOTE : Starting a search or scan turns off the battery saver.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yupiteru MVT-7100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yupiteru MVT-7100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Yupiteru MVT-7100

Yupiteru MVT-7100 Gebruiksaanwijzing - Nederlands - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info