674740
137
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 135FT-991 OperaTing Manual
112 SSB TX BPF
Function: Sets the frequency characteristics of the DSP
band-pass lter for transmitting in SSB mode.
Available Values: 100-3000/100-2900/200-2800/300-
2700/400-2600
Default Setting: 300-2700Hz
Description: Selects the frequency characteristics setting
of the DSP band-pass lter when transmitting in SSB
mode.
113 APF WIDTH
Function: Sets the bandwidth of the audio peak lter.
Available Values: NARROW/MEDIUM/WIDE
Default Setting: MEDIUM
Description: In CW mode the APF peak center frequen-
cy is set according to the CW PITCH frequency and
the chosen APF bandwidth value. In order to listen
to the desired signal comfortably, select one of the
three bandwidths of the peak lter.
114 CONTOUR LEVEL
Function: Adjusts the GAIN of the CONTOUR circuit.
Available Values: −40 - 0 - 20
Default Setting: −15
Description: Sets level of the attenuation or the gain of
the CONTOUR circuit.
115 CONTOUR WIDTH
Function: Sets the bandwidth (“Q”) of the CONTOUR
circuit.
Available Values: 1 - 11
Default Setting: 10
Description: Sets the bandwidth (WIDTH) of the CON-
TOUR circuit.
116 IF NOTCH WIDTH
Function: Sets the attenuation bandwidth characteristic
of the DSP IF notch lter on the VFO-A.
Available Values: NARROW/WIDE
Default Setting: WIDE
Description: Selects the attenuation bandwidth charac-
teristic setting of the DSP IF notch filter to “
NAR-
ROW
” or “
WIDE
”.
117 SCP DISPLAY MODE
Function: Sets the scope for either the spectrum or the
waterfall display.
Available Values: SPECTRUM/WATER FALL
Default Setting: SPECTRUM
Description: Selects the type of display when the scope
feature activates.
SPECTRUM:
Enables the spectrum display.
WATER FALL:
Enables the waterfall display.
118 SCP START CYCLE
Function: Selects the sweep interval of the Spectrum
Scope feature.
Available Values: OFF/3sec/5sec/10sec
Default Setting: OFF
Description: The scope spectrum is repeatedly swept ac-
cording the set interval.
119 ASC DIAL SPEED
Function: Selects the start condition of the Dial Auto
Scope feature whenever the Main Tuning Dial is
turned.
Available Values: 0.25/0.5/1/2/4kHz (sec)/DISABLE
Default Setting: 4kHz/sec
Description: When the Main Tuning Dial knob is rotated
at the set speed in ASC mode, the spectrum scope
sweeping is started automatically.
120 SCP SPAN FREQ
Function: Sets the bandwidth of the spectrum scope
sweeping.
Available Values: 50/100/200/500/1000 (kHz)
Default Setting: 100kHz
Description: Sets the bandwidth (SPAN) of the spectrum
scope.
121 PRMTRC EQ1 FREQ
Function: Sets the center frequency of the low range for
the 3 band parametric microphone equalizer.
Available Values: 100 - 700 (Hz)/OFF (100Hz/step)
Default Setting: OFF
Description: Selects the center frequency setting of the
low range of the 3 band parametric microphone
equalizer between “
100 Hz
” and “
700 Hz
”.
122 PRMTRC EQ1 LEVEL
Function: Sets the gain for the low range of the 3 band
parametric microphone equalizer.
Available Values: −20 - 0 - 10 (dB)
Default Setting: 5
Description: Adjusts the gain for the low range of the 3
band parametric microphone equalizer between “−
20
dB
” and “
+10 dB
”.
123 PRMTRC EQ1 BWTH
Function: Sets the width variation (“Q”) for the low
range of the 3 band parametric microphone equal-
izer.
Available Values: 1 - 10
Default Setting: 10
Description: Selects the value of the width (Q) for the
low range for the 3 band parametric microphone
equalizer between “
1
” and “
10
”.
Menu MoDe
137

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info