674740
136
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 134 FT-991 OperaTing Manual
101 RTTY OUT LEVEL
Function: Sets the output level during the sending/re-
ceiving of data in RTTY mode.
Available Values: 0 - 100
Default Setting: 50
Description: Sets the data output level during the send-
ing/receiving of data in RTTY mode. The higher the
setting, the higher the output level becomes.
102 RTTY SHIFT FREQ
Function: Sets the shift width for RTTY mode.
Available Values: 170/200/425/850 (Hz)
Default Setting: 170Hz
Description: Sets the shift width for RTTY mode.
103 RTTY MARK FREQ
Function: Sets the mark frequency for RTTY mode.
Available Values: 1275/2125 (Hz)
Default Setting: 2125Hz
Description: Sets the mark frequency for RTTY mode.
104 SSB LCUT FREQ
Function: Sets the low-frequency cutoff audio filter in
SSB mode.
Available Values: OFF/100Hz - 1000Hz (50Hz/step)
Default Setting: 100Hz
Description: This is the low-frequency cutoff audio lter
in SSB mode.
The cutoff frequency can be set at 50 Hz increments
between 100 Hz and 1000 Hz.
105 SSB LCUT SLOPE
Function: Sets the slope of the low-frequency cutoff au-
dio lter in SSB mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope setting of the low-fre-
quency cutoff audio lter in SSB mode.
106 SSB HCUT FREQ
Function: Sets the high-frequency cutoff audio lter in
SSB mode.
Available Values: OFF/700Hz - 4000Hz (50Hz/step)
Default Setting: 3000Hz
Description: This is the high-frequency cutoff audio l-
ter in SSB mode.
The cutoff frequency can be set at 50 Hz increments
between 700 Hz and 4000 Hz.
107 SSB HCUT SLOPE
Function: Sets the slope of the high-frequency cutoff au-
dio lter in SSB mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope setting of the high-fre-
quency cutoff audio lter in SSB mode.
108 SSB MIC SELECT
Function: Selects the microphone input jack for SSB
mode.
Available Values: MIC/REAR
Default Setting: MIC
Description: Selects the microphone input jack to be
used in SSB mode.
FRONT:
Inputs from the
MIC
jack on the front panel.
DATA:
Disables the microphone circuit on the front
panel and inputs from the
USB
jack or
RTTY/
DATA
jack on the rear panel.
109 SSB OUT LEVEL
Function: Sets the level of the SSB receiving signal out-
put from the
RTTY/DATA
jack.
Available Values: 0 - 100
Default Setting: 50
110 SSB PTT SELECT
Function: Sets the PTT transmit control for the SSB sig-
nal.
Available Values: DAKY/RTS/DTR
Default Setting: DAKY
Description: Selects the PTT transmit control method
for the SSB signal.
DAKY:
Controls the transmit signal from the
RTTY/
DATA
jack (pin 3) on the rear panel.
DTR:
Controls the transmit signal from the USB virtual
COM/DTR ports.
RTS:
Controls the transmit signal from the USB virtual
COM/RTS ports.
111 SSB PORT SELECT
Function: Sets the input jack of the SSB signal.
Available Values: DATA/USB
Default Setting: DATA
Description: Selects the input jack of the SSB signal
when “
108 SSB MIC SELECT
” is set to “
DATA
”.
DATA:
Inputs from the
RTTY/DATA
jack on the rear
panel.
USB:
Inputs from the
USB
jack on the rear panel.
Menu MoDe
136

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info