674740
135
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 133FT-991 OperaTing Manual
092 AMS TX MODE
Function: Sets the operation of the AMS function.
Available Values: AUTO/MANUAL/DN/VW/ANALOG
Default Setting: AUTO
Description: When using the AMS (AUTO) function,
the transceiver selects one of the three transmission
modes automatically according to the received sig-
nal.
AUTO:
Selects one of the transmission modes automati-
cally according to the received signal.
MANUAL:
By briey pressing the
PTT
switch, the operating
mode may be switched between digital and ana-
log mode.
DN:
Transmits in DN mode.
VW:
Transmits in VW mode.
ANALOG:
Transmits in FM mode (analog).
093 STANDBY BEEP
Function: Sets the Standby Beep function for digital
communications.
Available Values: OFF/ON
Default Setting: ON
Description: During a digital communication, an audible
beep sounds to indicate that the contact station has
completed a transmission (Standby Beep function).
094 RTTY LCUT FREQ
Function: Sets the low-frequency cutoff audio filter in
RTTY mode.
Available Values: OFF/100Hz - 1000Hz (50Hz/step)
Default Setting: 300Hz
Description: This is the low-frequency cutoff audio lter
in RTTY mode.
The cutoff frequency can be set at 50 Hz increments
between 100 Hz and 1000 Hz.
095 RTTY LCUT SLOPE
Function: Sets the slope of the low-frequency cutoff au-
dio lter in RTTY mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 18dB/oct
Description: Selects the slope setting of the low-fre-
quency cutoff audio lter in RTTY mode.
096 RTTY HCUT FREQ
Function: Sets the high-frequency cutoff audio lter in
RTTY mode.
Available Values: OFF/700Hz - 4000Hz (50Hz/step)
Default Setting: 3000Hz
Description: This is the high-frequency cutoff audio l-
ter in RTTY mode.
The cutoff frequency can be set at 50 Hz increments
between 700 Hz and 4000 Hz.
097 RTTY HCUT SLOPE
Function: Sets the slope of the high-frequency cutoff au-
dio lter in RTTY mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 18dB/oct
Description: Selects the slope setting of the high-fre-
quency cutoff audio lter in RTTY mode.
098 RTTY SHIFT PORT
Function: Sets the SHIFT input jack for RTTY mode.
Available Values: SHIFT/DTR/RTS
Default Setting: SHIFT
Description: Selects the SHIFT input jack for RTTY
mode.
SHIFT:
Inputs from the
RTTY/DATA
jack (pin 4) on the
rear panel.
DTR:
Controls the signal from the USB virtual COM/
DTR ports.
RTS:
Controls the signal from the USB virtual COM/
RTS ports.
099 RTTY POLARITY-RX
Function: Sets the shift direction for receiving in RTTY
mode.
Available Values: NOR/REV
Default Setting: NOR
Description: Sets the shift direction for receiving in
RTTY mode.
NOR:
The space frequency will be lower than the mark
frequency.
REV:
The mark frequency will be lower than the space
frequency.
100 RTTY POLARITY-TX
Function: Sets the shift direction for transmitting in
RTTY mode.
Available Values: NOR/REV
Default Setting: NOR
Description: Sets the shift direction for transmitting in
RTTY mode.
NOR:
The space frequency will be lower than the mark
frequency.
REV:
The mark frequency will be lower than the space
frequency.
Menu MoDe
135

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info