674740
76
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 74
FT-991 OperaTing Manual
Split-Frequency operAtion
A powerful capability of the
FT-991
is its exibility in Split Frequency operation using the VFO-A and VFO-B fre-
quency registers. This makes the
FT-991
especially useful for high-level DX-peditions. The Split operation capability is
very advanced and easy to use.
1. Rotate the Main Tuning Dial knob to set the desired
RX frequency.
2. Press the
A/B
button, then rotate the Main Tuning
Dial knob to set the desired split TX frequency.
3. Press the
A/B
button, then press the
SPLIT
button.
The VFO-B frequency will be shown in the TFT dis-
play and the LED indicators will appear as below:
VFO-A
RX
Indicator: “ON”
(LED glows Green)
VFO-A TX
Indicator: “OFF”
(LED Off)
VFO-B RX
Indicator: “OFF”
(LED Off)
VFO-B TX
Indicator: “ON” (LED glows Red)
SPLIT Button
TXW Button
A/B
Button
During Split operation, the VFO-A register will be used
for reception, while the VFO-B register will be used for
transmission. If you press the
SPLIT
button once more,
Split operation will be cancelled.
Advice:
During Split operation, pressing the
A/ B
button will
reverse the contents of VFO-A and VFO-B. Press the
A/B
button once more to return to the original fre-
quency alignment.
During Split operation you may listen to the TX fre-
quency temporarily while pressing the
TXW
button
located on the bottom left of the Main Tuning Dial
knob.
While pressing the
TXW
button during split opera-
tions, the frequency of transmit on VFO-B can be
changed.
During Split operation it is also possible to set VFO-
A and VFO-B to different Amateur bands if a multi
band antenna is used.
Quick Split Operation
The Quick Split feature allows setting a one-touch offset
of +5 kHz compared to the VFO-A frequency, to be ap-
plied to the transceiver VFO-B (transmit) frequency,
1.
Start with regular transceiver operation on the VFO-A.
VFO-A RX
Indicator: “ON” (LED glows Green)
VFO-A TX
Indicator: “ON” (LED glows Red)
VFO-B RX
Indicator: “OFF”
(LED Off)
VFO-B TX
Indicator: “OFF”
(LED Off)
2. Press and hold in the
SPLIT
button for one second
to engage the Quick Split feature, and apply a fre-
quency 5 kHz above the VFO-A frequency to the
VFO-B frequency register.
The VFO conguration will then be:
VFO-A RX
Indicator: “ON” (LED glows Green)
VFO-A TX
Indicator: “OFF”
(LED Off)
VFO-B RX
Indicator: “OFF”
(LED Off)
VFO-B TX
Indicator: “ON” (LED glows Red)
3. Press and hold in the
SPLIT
switch for one second
to increment the Sub (VFO-B) offset frequency an-
other +5 kHz.
quick pointS:
The offset of VFO-B from VFO-A is programmed
via the Menu and is set to +5 kHz at the factory.
However, other offsets may be selected using the fol-
lowing procedure:

1. Press the
MENU(SETUP)
button to engage the
Menu mode.
2. Rotate the
MULTI
knob to select Menu item “
035
QUICK SPLIT FREQ
”.
3. Touch
[
SELECT
]
on the LCD, then rotate the
MULT
knob to select the desired offset. The avail-
able setting range is –20kHz - +20kHz (factory de-
fault: +5 kHz).
6: 616 (
37+%-25+6 (4'3.
/' )1472 &+5#$.'
M
1(
*\



/
transMitter convenience features
76

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info