674740
75
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 73
FT-991 OperaTing Manual
Split operAtion uSing the tx clAriFier
For split TX/RX operation in “casual” pile-ups, where the split is less than 10 kHz, the TX Clarier (Offset Tuning) fea-
ture may be utilized.
1. Press the
MENU(SETUP)
button to enter the Menu
mode.
2. Rotate the
MULTI
knob to select Menu item “
040
CLAR MODE SELECT
”.
3. Touch
[
SELECT
] on the LCD, then rotate the
MULTI
knob to set this Menu item to “
TX
” (the de-
fault setting is “
RX
”).
CLAR/VFO-B Knob
CLAR Button
MULTI Knob
MENU(SETUP) Button
F$QEV
%.#4 /1&' '56.'%
#/ .% 6715. 2'
4:

#/ .% 67'(4 3 1((

4. Touch
[
ENTER
]
on the LCD to save the new set-
ting.
%.#4 /1&' '56.'% 6:
F$QEV#/ .% 6715. 2'
#/ .% 67'(4 3 1((

5. Press the
MENU(SETUP)
button or touch
[
BACK
]
on the LCD to exit to normal operation.
6. Press the
CLAR
button. The “
TX
” icon will appear
in the TFT display.
quick point:
The Clarifier is frequently used for receiver offset
tuning. However, for DX pile-ups where the DX
station is using a split of less than 10 kHz, the TX
Clarier function is usually the quickest way to set
the transmitter to the desired offset frequency.
7. Rotate the
CLAR/VFO-B
knob to set the desired
transmitter offset. A maximum split of ±9.999 kHz
may be set.
8. To exit from TX Clarier operation, press the
CLAR
button once more. The
TX
icon will disappear
from the display.
Advice:
When listening to a “pile-up” calling a DX station, in
order to nd the station currently being worked, you
may press the
CLAR
button. Then, use the
CLAR/
VFO-B
knob to zero in on the station calling the DX
(use the SPOT function on CW for precise alignment
of your frequency). You may then press the
CLAR
button again to cancel the RX Clarier, and return to
reception on the DX station’s frequency.
Just as with receiver Clarier operation, the amount
of offset from the original VFO frequency will ap-
pear in the display.
As with receiver Clarier operation, when you turn
the TX Clarier off, the last-used offset is remem-
bered, and will be available if you turn the TX Clari-
er back on. To clear the Clarier offset, press and
hold the
CLAR
button for more than 1 second.
quick point:
When attempting to work a DX station on CW in a split
frequency pile-up, remember that a large number of oth-
er stations may also be using Yaesu transceivers with ca-
pability similar to that of your
FT-991
. On the DX side
of the pile-up, everyone calling precisely on the same
CW frequency will sound like a single tone! So you may
have more success if you use the RX Clarier to nd a
hole in the pile-up, instead of trying to zero-beat the last
station worked by the DX station.
transMitter convenience features
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info