478500
27
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 25FT-897D OPERATING MANUAL
IF SHIFT
The receivers IF SHIFT feature is an effective interference-
reduction tool, which allows you to shift the passband re-
sponse higher or lower without changing the pitch of the
incoming signal.
RECEIVER ACCESSORIES
1. Press and hold in the CLAR/IF SHIFT button for one
second to activate the IF SHIFT feature. An icon, such
as “ ”, “ (slightly shifted to the upper side),” “ (more
shifted to the upper side),” “ (slightly shifted to the
lower side),” or “ (more shifted to the lower side)”
icon will appear at the right of the frequency display to
indicate the IF SHIFT’s current position.
2. Rotate the CLAR knob, as needed, to reduce or elimi-
nate the interference.
3. To turn the IF SHIFT feature off, again press and hold in
the CLAR/IF SHIFT button for one second. The last
setting of the IF SHIFT control will be retained until you
change it again.
If you wish to make a more permanent shift in the receivers
IF passband, use Menu Mode No-015
[
CAR LSB R
]
(for
LSB mode) or No-017
[
CAR USB R
]
(for USB mode). This
allows you to set up a higher or lower listening pitch, if you
prefer such as compared to the default passband response.
See page 57.
AGC
(
AUTOMATIC GAIN CONTROL
)
The receiver recovery time constant of the AGC system may
be modified to match your operating needs.
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row “l”
[
NB, AGC, AUTO
]
appears on the display.
2. Press the
[
C
]
key to toggle the AGC recovery time con-
stant among the following selections:
AUTO
FAST
SLOW
AUTO
where “AUTO” represents “FAST” on CW and DIG
(AFSK), and “SLOW” on the voice modes.
If you disable the AGC by pressing the
[
B
](
AGC
)
key (to make the parentheses disappear), the S-
meter (which monitors AGC voltage) will cease
to function. Depending on the setting of the RF Gain con-
trol, incoming signals will probably be distorted if the AGC
is turned off.
BATT- A
BATT- B
BAND
MODE
CLARAF
LOCK
PHONE
MIC
SQL
/RF
MEM/VFO CH
DWN UP
V/M
DSP
UP
DSP
F
CLARCLAR/IF SHIFT
BATT- A
BATT- B
BAND
MODE
CLARAF
LOCK
PHONE
MIC
SQL
/RF
MEM/VFO CH
DWN UP
V/M
DSP
UP
DSP
F
C
B F MEM/VFO CH
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info