805648
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
5. Inspect unit for cracks, pin holes, or other imperfections that
could cause air compressor to become unsafe.
6. Never cut or drill holes in the air compressor.
7. Make sure the hose is free of obstructions or snags.
8. Entangled or snarled hoses can cause loss of balance or footing
and may become damaged.
9. Use the air compressor only for its intended use. Do not alter or
modify the unit from the original design or function.
10. Always be aware that misuse and improper handling of this air
compressor can cause injury to yourself and others.
11. Never leave an air compressor unattended with the air hose
attached to the item being inflated.
12. Do not continue to use a air compressor or hose that leaks air or
does not function properly.
13. Always disconnect the air supply and power supply before
making adjustments, servicing an air compressor, or when an air
compressor is not in use.
14. Do not attempt to pull or carry the air compressor by the hoses.
15. Always follow all safety rules recommended by the manufacturer
of your air compressor, in addition to all safety rules for the air
compressor. Following this rule will reduce the risk of serious
personal injury.
16. Household use only.
17. Do not use air compressor as a breathing device.
18. Never direct a jet of compressed air toward people or animals.
Take care not to blow dust and dirt towards yourself or others.
Following this rule will reduce the risk of serious injury.
19. Protect your lungs. Wear a face or dust mask if the operation is
dusty. Following this rule will reduce the risk of serious personal
injury.
20. Do not use this air compressor to spray chemicals. Your lungs can
be damaged by inhaling toxic fumes.
21. Check damaged parts. Before further use of the air compressor
or air tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly and
perform its intended function.
22. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions that may
affect its operation. A guard or other part that is damaged should
be properly repaired or replaced by an authorized service center.
Following this rule will reduce the risk of shock, fire, or serious
injury.
23. Constantly stay aware of cord location. Following this rule will.
reduce the risk of electric shock or fire.
24. Risk of bursting. Carefully monitor objects during inflation.
25. To reduce the risk of overinflation, use a reliable pressure gauge
periodically during inflation. The pressure gauge on the air
compressor is for reference only and is therefore not binding for
exact values.
26. Never leave the air compressor unattended during inflation.
27. Allow pump to cool for five (5) minutes after each five (5) minutes
of continuous use. Never block the inflating or deflating outlets
while operating.
28. Save these instructions. Refer to them frequently and use them
to instruct others who may use this air compressor.
29. If you loan someone this air compressor, loan them these
instructions also.
USE AND FUNCTION (FIG. 1)
INSTALLING AND RELEASE THE BATTERY PACK
Set Forward/Reversing lever to the center (off position). Slide
charged battery pack into the housing until the battery pack locks
into position. To remove the battery pack, press the battery pack
release button and slide the battery pack forward.
CHARGING THE BATTERY
Do not use other battery chargers. The supplied battery charger is
designed for the Lithium-ion battery in your machine. This charger
is suitable for indoor use only.
NOTE: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery with the
battery charger before using your power tool for the first time. The
Lithium-ion battery can be charged at any time without reducing
its service life. Interrupting the charging procedure does not
damage the battery.
The charging procedure begins as soon as the mains plug of the
battery charger is plugged into a socket outlet and the charge
connector is plugged into the socket on the side of the battery.
The battery charge indicator on the plug shows the charging
process. During the process the indicator shows a red/green light.
When the battery charge indicator shows a green light, the battery
is fully charged.
During the procedure, the handle of the tool warms up, this is
normal.
The battery requires 3 - 5 hours to fully charge.
Disconnect the battery charger from the mains supply when not
in use.
NOTE: The power tool cannot be used during the charge procedure.
START SWITCH AND SELF-LOCKING SWITCH
1. When press start switch, push self-locking switch up, which will
make the switch in LOCK- ON. This guarantees the safety for the
user and of the tool.
2. After the pressure enough, pressing the start switch, then the
self-locking switch will sprang back down.
LED WORKING LIGHT
CAUTION: Do not look directly into the light or the source of light.
ACCESSORIES
The supplied accessories perform a variety of functions. The
tapered adaptor can be used on smaller pinch valves to inflate
small items like children’s toys, which usually require the user to
inflate them by blowing air into them. The sport ball needle can
be used to inflate any type of sports ball or any other item that
requires an inflation sport ball needle.
NOTE: When inflating items of 0.7 bar (10 psi) or less, inflate in
short bursts and check after each burst by feel or with a calibrated
measuring device to determine accurate pressure.
USING THE AIR COMPRESSOR
1. Install the battery pack.
2. Position air chuck clamp in the unlock position perpendicular to
the air hose.
3. Place the air chuck on the valve stem.
4. Push the air chuck down so that the threaded section of the
valve stem is inside the air chuck.
5. Clamp the end of the air chuck down onto the valve stem by
pressing air chuck clamp down until it stops or is parallel with
the air hose.
MAINTENANCE AND STORAGE
CAUTION!
Do not use any products that may damage the
unit (abrasives, corrosives, alcohol, steam cleaners,
abrasive rags, scrapers, etc.). Do not put the unit in
a dishwasher for cleaning!
The unit must be completely switched off, disconnected and cooled
before cleaning.
MAINTENANCE
When necessary, you can clean the unit body with a soft,
dry cloth.
Check that the machine has not been damaged. If the machine
is damaged, we recommend you to call a qualified technician to
inspect the machine and make necessary repairs.
When necessary, charge the battery.
STORAGE
Store the tool and its accessories in a dry, frost-free place.
The tool should always be kept out of the reach of children.
We recommend to store the tool in its original packaging or
covering it with a suitable fabric to protect it from dust.
TECHNICAL SPECIFICATIONS
MODEL CAP110
Voltage 18 Vdc
Maximum pressure 7.5 bar
Charger Input 100 - 240V ~ 50/60Hz, 0.3A
Output 20V dc 0.3A
DECLARATION OF SOUND LEVEL ACCORDING TO EN 60745
Sound pressure level LpA, d: 81 dB(A) K = 3 dB(A)
Sound power level LWA, d: 95 dB(A) K = 3 dB(A)
DECLARATION OF VIBRATION LEVEL ACCORDING TO EN 60745
Vibration level (m/s2)3.6
Uncertainty (m/s2)K = 1.5
Quick Recharging Battery voltage 18V DC
Charging time 3 - 5 hours
WARNING:
The declared vibration total value has been
measured in accordance with standard EN 60745
test method and may be used for comparing one
tool with another; The declared vibration total value
may also be used in a preliminary assessment of
exposure.
That the vibration emission during actual use of
the power tool can differ from the declared total
value depending on the ways in which the tool is
used; and of the need to identify safety measures to
protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Mascot Online BV
Bellstraat 7
3861 NP Nijkerk
The Netherlands
www.wolfgang-tools.nl
Made in PRC
INSTRUCTIONS FOR THE PROTECTION OF THE
ENVIRONMENT
(WEEE, the waste electrical and electronic
equipment directive)
Your product has been manufactured from high
quality materials and components which can be
recycled and used again. At the end of its life, this
product cannot be disposed of in normal domestic
waste, but must be taken to a special collection
point for the recycling of electrical and electronic
equipment. The waste container marked with a
cross symbol on the item, in the user manual and on
the packaging informs you of this. The raw materials
used are suitable for recycling.
By recycling used appliances or raw materials you are making an
important contribution to the protection of our environment.
You can find out the location of your nearest collection point
from your local council.
Do not dispose of batteries in your household waste.
To dispose of the batteries, take them to your local recycling
station. Contact your local government offices for details.
EN - manual Luchtpomp 18V CPS01180000MO.indd 2 10/01/2018 14:12
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Wolfgang Tools CAP110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Wolfgang Tools CAP110 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Wolfgang Tools CAP110

Wolfgang Tools CAP110 Gebruiksaanwijzing - Nederlands - 2 pagina's

Wolfgang Tools CAP110 Gebruiksaanwijzing - Deutsch - 2 pagina's

Wolfgang Tools CAP110 Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info