336432
18
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
GB
18
In the next 5 seconds, touch one of the
sensors (4) or (5) corresponding
to the plate that you wish to time or alter.
The will stop blinking in the indicator
for this plate and the digits on the indica-
tor (7) of the clock will start to blink.
4 Touch the sensors (11) or (12)
again until the required time is set. After
a few seconds the decimal point in the
indicator (7) will start to blink, indicating
that the countdown has started.
If you wish to cancel a timing already set,
simply set the time desired in step 4 to 00 or,
directly, by turning off the plate in question.
When you have timed more than one
plate, by default, the indicator (7) of the
clock will display the shortest remaining
time. This time will correspond to the plate
whose indicator (3) displays the blinking
with the decimal point.
Remember that the decimal point in a
power indicator (3) shows you that this plate
is timed! If this decimal point is blinking and
it’s shown the , it means that the indicator
(7) of the clock is showing you, at that pre-
cise moment, the time remaining in the
countdown for that hotplate.
Please remember that if, during the
countdown, you turn off the touch panel
using the on/off sensor button (1),
the countdown will be cancelled!
Overheating safety feature
The induction areas are protected against
overheating that may cause damage to the
electronic system.
The internal fan is automatically enabled
and disabled, depending on the tempera-
ture of the electronic system. Therefore,
the fan may continue to work for a few
minutes to cool the electronics if you
switch the cooker off when the fan is swit-
ched on.
Power surges
Touch controls can withstand a
certain degree of power surges in the
electricity supply. Abnormally high
power surges can cause the control
system to malfunction (as with any type
of electrical appliance).
Suggestions and
recommendations
To ensure maximum performance from
your hob, follow these guidelines:
* Use pans with a flat base, as the greater
the surface contact between the pan
and the glass, the greater will be the
heat transmission. We recommend the
use of heavy pans so that the base is
more difficult to dent. Figure 4 shows
how pans that are dented or concave
have a smaller contact surface.
* Make sure that the pans are well centred
on the outlines shown on the heating
area.
* Dry the pans bases before putting them
on the glass ceramic hob.
* Do not drag pans with corners or edges
that could damage the glass.
* The glass withstands some impacts from
large containers with no sharp edges.
Be careful with impacts from small and
sharp utensils.
fig. 4
Right
Wrong
Wrong
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Teka it 641 exp bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Teka it 641 exp in de taal/talen: Engels als bijlage per email.

De handleiding is 0,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info