336432
17
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
GB
17
the clock.
If, while the clock is working as a count-
down chronometer, at some point the
induction plates are set at power level 0,
the touch control panel will turn off after a
few seconds, but the chronometer will con-
tinue working until it finishes the count-
down or the countdown is cancelled.
To cancel the chronometer, simply set the
remaining time to 00.
Timer function
(except models …630)
This function will help you with cooking as
you will not have to be present during the
following: the timer plate(s) will automati-
cally turn off at the end of the set time. The
device has an individual timer for each
plate. This allows it to time all the plates at
the same time, if required.
The function is controlled with the time
increase/decrease sensors and
(11/12) associated with the clock (7).
SINGLE plate timer
To activate the timer on one single plate,
proceed as follows:
1 With the plate powered on and the clock
turned off, touch one of the sensors
(11) or (12) corresponding to the
clock.
2 Turn on the indicator (7) displaying 00.
At the same time, a blinking will appe-
ar on the indicators for each of the pla-
tes that are powered on.
3 In the next 5 seconds, touch one of the
sensors (4) or (5) correspon-
ding to the plate you wish to time. The
will be set on the indicator for this
plate and the digits on the clock indica-
tor (7) will start to blink.
4 You have a further 5 seconds to select
the time required, simply by touching the
sensors (11) or (12) on the
clock. After a few seconds, the digits on
clock indicator (7) will stop blinking and
the decimal point on the clock and the
timed plate will start to blink, indicating
that the countdown has started.
Once the required time has been set, be
careful not to activate any other sensor
since the device may interpret that you
wish to exit the timer function. While the
clock digits blink, you can alter their value
but do not touch different sensors other
than (11) or (12).
Once the countdown is complete, the
timed plate will power off and a series of
bleeps will be heard that can be cancelled
by touching any of the sensors (11) or
(12) associated with the clock.
Timing more than one plate / Altering
the programmed time
During a countdown, you can alter the
remaining time or time a new plate.
1 With the Touch Control powered on and
a plate timed, touch one of the sensors
(11) or (12) corresponding to the
clock.
2 The countdown will stop and the indica-
tor (7) displays 00. A blinking will dis-
play on the indicators for each of the pla-
tes that are powered up.
3 At that point, you can time another plate
or alter the remaining time on a pre-
viously time set plate. To distinguish
them, take into account the decimal
point appearing on the bottom right
of the indicator (3), only on that/those
plate/s that are timed at that moment.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Teka it 641 exp bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Teka it 641 exp in de taal/talen: Engels als bijlage per email.

De handleiding is 0,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info