782037
28
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
28 GB
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
Withdrawal
The withdrawal occurs when the chain on the under-
side of the bar suddenly stuck because it is jammed
or encounters a foreign object in the wood. The chain
then pulls the saw forward. The withdrawal often hap-
pens when the chain is not running at full speed when in
contact with the wood.
Avoid withdrawal
Be aware of the forces and situations that can lead to
jamming of the chain on the underside of
the bar.
Always start with running at full speed chain to cut.
Recoil
The recoil occurs when the chain on top of rail sudden-
ly stuck because it is jammed or encounters a foreign
object in the wood. The chain can jerkily hold the saw
against the operator. Rebounds happen often if the top
rail is used for cutting.
Avoid recoil
Be aware of the forces and situations that can lead to
jamming of the chain on top of rail.
Do not cut more than one branch at a time.
Do not tilt the rail to the side when you pull them out of a
cutting gap, since the chain could get caught otherwise.
9. Maintenance
NJURY WARNING!
Before working on the device, disconnect the mains
cable from the socket.
Always wear protective gloves when working on or
around cutting tools.
Regularly check the device before starting work.
Damaged blades have to be repaired or replaced by
an authorised service department before you can work
with the device.
Clean the blades with a soft brush after working with
the device and spray a thin layer of liquid protective oil
on the whole blade.
Always keep the ventilation holes in the motor casing
free and clean.
Never use water to clean or spray the device. Clean
the motor casing with a damp cloth and never use de-
tergents or solvents! This may damage the device‘s
plastic parts. Dry the motor casing carefully afterwards.
Always store the machine with the supplied protective
cover.
Only use OEM parts for maintenance work. Using parts
other than original parts can cause damage to the ma-
chine.
Servicing and sharpening of saw chain
The correct sharpened chain
Working e󰀨ectively with the chainsaw is only possible if
the chain is in good condition and
sharp. This also reduces the risk of kickback.
Always observe the condition of the tree.
Look for rot and decay in the roots and branches.
If they are rotten inside, they can break o󰀨 and fall down
unexpectedly during cutting. You could also attend by
fractured and dead branches out, which is solved by the
shake and fall on you. For very thick or heavy branches
you rst make a small incision below the branch before
you work from the top down to avoid chipping.
Basic cutting technique
Heavy branches break o󰀨 easily when sawing. They tear
long strips of bark away from the trunk, which damages
the tree sustainably. The following section technique can
signicantly reduce this risk:
Saw the rst branch about 10 cm from the trunk.
Put in about 15 cm from the base of the top of a further
section.
Saw until the branch breaks. The risk of injury on the
trunk is no.
Finally, remove with a clean cut from the top of the trunk
along the remaining.
Thus, the damage to the tree are kept as low as possi-
ble, we recommend the interface additionally to seal with
grafting wax.
Hazards by reactive forces
Reactive forces occur during operation of the saw chain.
The forces which are applied to the wood are against the
operator. They occur when the moving chain comes into
contact with a xed object such as a branch or is pinched.
These forces can lead to a loss of control and injury.
Understanding the origin of these forces can help you to
avoid the scare and the loss of control. This saw is desi-
gned to make the return e󰀨ects are not as noticeable as
with traditional chainsaws.
Always still keep a rm grip and a good level to maintain
control of the tool in doubt.
The most common e󰀨ects are:
setback
recoil,
retreat
Kickback
The setback can occur when the moving saw chain
meets at the upper quarter of the guide rail on a solid ob-
ject or is pinched. The cutting force exerted on the chain
from the saw, a rotational force in the opposite direction
to the chain travel. This leads to an upward movement of
the guide rail.
Avoid kickback
The best protection is to avoid situations that lead to set-
backs.
Keep the position of the upper guide rail always in mind.
Leave this place never come into contact with an ob-
ject. Cut anything with it. Be especially careful near wire
fences and cutting small, hard knots, in which the chain
can easily pinch.
Cut only one branch at a time.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach TPX710 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach TPX710 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 3.78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info