781437
27
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002-58
DE GB FR DE GBDE GB FR DE GB FR DE GB FR
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002-58
27 І 92
1) Safety measures
Do not use damaged or deformed saw blades;
Use the saw only when its safety equipment is in
position, particularly after changing the sawing
mode, and when the guard is in a good condition
and has been properly maintained.
Replace worn table inserts;
Only ever use saw blades which are recommended
by the manufacturer and comply with EN 847-1,
alongside a warning sign that the riving knife must
not be wider than the cut kerf width and not thinner
than the saw blade body;
Ensure that the rip fence is secured properly when
cutting diagonally;
Do not use saw blades made of high speed steel;
Connect the saw to an extraction unit when cutting
timber.
Wear appropriate personal protective equipment.
This may include:
Hearing protection to reduce the risk of becom-
ing hearing impaired;
Breathing protection to reduce the risk of inhal-
ing harmful dust;
Wear gloves when handling saw blades and
rough material (saw blades must be transported
in a suitable container whenever feasible);
Ensure that the material to be cut is taken into ac-
count when selecting the saw blade.
Always return the push stick to its bracket when it is
no longer being used.
2) Maintenance and care
Observe the manufacturer‘s notices concerning
possible noise reduction (e.g. using saw blades
which have been constructed for lower noise pol-
lution, and saw blade and machine maintenance).
Machine faults, including guards or saw blades,
must be resolved as soon as they are detected.
3) Working safely
Select a saw blade suitable for the material you
are cutting;
Never use the saw for cutting materials other
than those recommended by the manufacturer;
The oor surrounding the machine must be level,
clean and free from loose material such as wood
chippings and offcuts;
Make sure the room and your work area are well
lit;
Comply with the instructions for replacing the
saw blade.
m WARNING
In the circular saw and mitre saw mode, the safe-
ty devices have to be returned to their proper
position.
In the table circular saw mode, a push stick or a
push block with handle has to be used in order to
prevent the operator getting too close to the saw
blade with his/her hand when working.
The operator must be trained sufciently in the
set-up, use and operation of the machine;
Ensure that the arm of the saw is secured prop-
erly when cutting diagonally;
Ensure that the arm of the saw is secured prop-
erly in the work position when in table circular
saw mode;
Before leaving the work area, turn off the saw;
Ensure that the circular saw table is secured at
the selected height;
Adhere to specications by the staff association.
Attach the dust extraction unit for every job. The
operator must be informed of the conditions which
inuence dust release, e.g. the type of material
(registration and source), the signicance of local
precipitation and the correct setting of guards/guid-
ing plates/guidance bars.
Operate the saw only with a suitable extraction
unit or a commercially available industrial vacuum
cleaner.
Never remove loose splinters, wood chippings or
jammed wood when the saw blade is rotating.
Turn off the machine before clearing faults or re-
moving jammed wood. - Disconnect the mains
plug -
Replace the table insert when the sawing gap is
worn away. - Disconnect the mains plug -
This machine complies with relevant safety stipula-
tions.
Keep your work area clean and tidy. Untidiness and
unlit work areas can lead to accidents.
Keep the machine away from rain and wet condi-
tions. Water ingress into the power tool increases
the risk of an electric shock.
Be careful, watch what you are doing and work sen-
sibly with your power tool. Do not use the machine
when you are tired or under the inuence of drugs,
alcohol or medication. A moment of carelessness
when using the power tool can lead to serious in-
jury.
Do not use a power tool which has a faulty switch.
A power tool which cannot be turned on or off, is
dangerous and must be repaired.
Power tools which are not being used should be
stored beyond the reach of children.
Do not let others use the machine if they are not
familiar with it or have not read these instructions.
Power tools are dangerous when they are being
used by inexperienced people.
Keep your cutting tools sharp and clean. Carefully
maintained cutting tools with sharp cutting edges
jam less and are easier to guide.
If the power tool‘s connection cable is damaged, it
has to be replaced by a specially pre-adjusted con-
nection cable which is available from the customer
service organisation.
Have your machine repaired by qualied specialists
and only with original spare parts. This ensures the
safety of the machine.
The position of the machine must be stable.
Before commissioning, all covers and safety de-
vices must be installed correctly.
The saw blade has to be able to run freely.
In the event of timber which has already been used,
watch for foreign objects such as nails or screws
etc.
Before turning on the main switch, make sure that
the saw blade is mounted correctly and all moving
parts run smoothly.
Additional safety notices for table, chop and mi-
tre saws
Ensure that, in table circular saw mode, the arm is
positioned tightly in the work position.
Ensure that, in table circular saw mode, the arm is
secured properly for inclined cuts.
Ensure that the table is secured properly when the
operating mode of the saw is changed.
GB
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HM100T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HM100T in de taal/talen: Duits, Engels, Pools, Zweeds, Noors als bijlage per email.

De handleiding is 6,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info