4
2. Set Up
2.1. Fitting and connecting the speakers (AXIUM HD-D45 only)
According to the model of your SAGEM AXIUM™ Home Cinema Screen, refer to the following paragraphs:
Model AXIUM HD-D45 see § 15.2
Model AXIUM HD-D45S see § 16.2
Model AXIUM HD-D56B see § 17.2
2.2. Aerial connection
Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM
AXIUM™ Home Cinema Screen.
Your SAGEM AXIUM™ Home Cinema Screen has two internal tuners (except model AXIUM HD-D45S, which only
has one tuner) and one cable is sufficient to feed them both.
2.3. Mains connection
Insert the mains plug into a 220-240V~ 50H zelectrical wall socket.
2.4. Switching on your SAGEM AXIUM™ Home Cinema Screen
3
1.2. Maintenance
• Before doing anything, disconnect the mains lead from the wall socket.
• Clean the cabinet using a soft, slightly damp cloth and a cloth with a non-abrasive, non wax detergent.
• Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution.
• Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the
screen.
Your SAGEM AXIUM™ Home Cinema Screen utilises high voltage. Never attempt to access
the interior of the apparatus, except when you are changing the lamp unit.
Do not open or dismantle this product as this will expose you to the risk of electrocution.
This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as
the bulb indicator lights up on the front panel.
When the SAGEM AXIUM™ Home Cinema lamp reaches the end of its working life you may
hear a loud, sharp sound indicating it has expired. The appliance will only function when you
replace the bulb.
To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the
mains lead from the wall socket.
Wait at least one hour before attempting to change the lamp unit.
Make sure that you follow the whole replacement procedure described in 'Changing
the lamp unit' on page 23.
ENVIRONMENT
Preservation of the environment as part of a sustainable development logic is an essen-
tial concern of SAGEM SA. The desire of SAGEM SA is to operate systems observing the
environment and consequently it has decided to integrate environmental performances in
the life cycle of its products, from manufacturing to commissioning, use and elimination.
PACKAGING
The presence of the logo (green dot) means that a contribution is paid to an approved
national organisation to improve packaging recovery and recycling infrastructures.
To facilitate recycling, please respect the sorting rules set up locally for this kind of waste.
BATTERIES
If your product contains batteries, they must be disposed of at appropriate collection
points.
THE PRODUCT
The crossed-out waste bin stuck on the product means that the product belongs to the
family of electrical and electronic equipment.
In this respect, the European regulations ask you to dispose of it selectively:
• At sales points in the event of the purchase of similar equipment.
• At the collection points made available to you locally (drop-off centre, selective collec-
tion, etc.).
In this way you can participate in the re-use and upgrading of Electrical and Electronic
Equipment Waste, which can have an effect on the environment and human health.
LAMP UNIT
The worn-out lamp unit must be recycled. (Contact your waste recycling agency to obtain
the address of the nearest depot).
Switch the Home Cinema Screen on by pressing the ON/OFF switch on the lefthand side
of your appliance (See § 15.1, 16.1, 17.1 according to the model).
Setting up your remote control:
Open the battery compartment cover and insert the two R6-1.5V type batteries.
Make sure that the batteries are installed correctly.
Do not use batteries of different types or rechargeable batteries.
Switching on your SAGEM AXIUM™ Home Cinema Screen:
Press the standby button on the remote control or righthand side door.
NB: The on/off indicator light located on the front panel of your SAGEM AXIUM™ Home Cinema Screen
flashes orange whilst the lamp is warming up, then goes out when the lamp is functioning.
When you set up your SAGEM AXIUM™ Home Cinema Screen for the first time, you can take advantage of a
rapid installation procedure after this warm-up phase (see chapter 3).
Connecting other audio/video or computer appliances is covered in chapter 7. Before looking at this, proceed to
the rapid installation.
