POWEG8050 EN
Copyright © 2022 VARO P a g e | 13 www.varo.com
▪ Insert the 4 mounting bolts (4) from above through the round handle (5) and fix them onto
the barrier bar (6) with the 4 nuts.
▪ Tighten the bolts (4).
8.2 Fitting the quick release mechanism (Fig. 3)
▪ Hook in the carabiner (E ) and secure it with the red strap (F) on the quick release
mechanism. (Fig. 3c - 3e)
▪ Pull on the red strap if you have to release the appliance quickly.
8.3 Fixing/attaching the carrying harness (Fig. 4)
WARNING! When using the machine it must always be hooked securely to
the harness. Otherwise you will be unable to control the brush cutter safely
and this can result in injury to yourself or others. Never use a harness with a
defective quick release.
▪ Hook the carrying harness (56) into the carrying lug (3).
▪ Adjust the length of the carrying harness (56) to your size so that the carrying lug (3) is at
hip height when hooked in place.
8.4 Assembling the hedge trimmer (Fig. 5)
▪ Start by undoing the screw grip (8) on the shaft (10) of the engine unit.
▪ Push the front shaft (25) of the hedge trimmer onto the shaft (10) of the motor unit, turn
left/light and keep pushing the front shaft until the safety lever (9) clicks into the locking
hole.
▪ Press the cover (7) that protects the safety lever 9 downwards and hold it down.
▪ Tighten the screw grip (8).
Note: assembly of chain saw / trimmer / brush cutter / extension attachment
(68) is carried out in the same order
8.5 Removing the hedge trimmer
▪ Undo the screw grip (8) .
Release the safety lever (9) by pressing and pull the front shaft (25) on the hedge trimmer out
of the shaft (10) on the motor unit.
Note: removal of chain saw / trimmer / brush cutter / extension attachment
(68) is carried out in the same order
8.6 Swivelling the hedge trimmer
▪ Press both lock /release lever (20) and control lever (24) and swivel the hedge trimmer
into the desired position/ angle
▪ Allow the control lever (24) to click into the recess in the base plate (hedge trimmer) (23).
