795825
15
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
POWEG8050 EN
Copyright © 2022 VARO P a g e | 15 www.varo.com
WARNING! Never work without chain lubrication! If the saw chain runs dry,
the cutting equipment may become irreparably damaged in a short time.
Always check chain lubrication and oil level in the tank before starting work.
Note :Use only saw chain oil. Preferably biodegradable. Do not use waste oil,
motor oil, etc.
Note: While working, check whether the chain lubrication is working
correctly.
8.11 Sharpening the saw chain
You can have your saw chain sharpened fast and correctly by specialist dealers, from whom
you can also obtain chain sharpening equipment to enable you to sharpen the chain yourself.
Please follow the corresponding operating instructions.
Take care of your tools. Keep your tools sharp and clean to enable you to work well and safely.
Follow the maintenance regulations and the instructions for changing tools
8.12 Fitting/ removing the blade guard
When working with the 3-section cutting blade, the blade guard (50) must be fitted. Fold the
metal sheet of the front shaft (53) down slightly. The blade guard (50) is positioned under the
metal sheet and the shaft (53) mounting arm. The blade guard (50) is now attached to the front
shaft (53) with 2 screws (49). Use the supplied Allen key 60
Cutting equipment
Protective equipment
3-section cutting blade (51)
Blade guard (50)
Trimmer with cutting filament(52)
Blade guard (50) + cutting filament protective
guard ©
Warning! do not use any other cutting equipment apart from that which is supplied with the
product. The use of any other cutting equipment or protective equipment is deemed to be
improper and carries a significant risk of accidents.
8.13 Installing / replacing the cutting blade (Fig. 7A-F)
Fit/remove the 3-section cutting blade (51) as shown in Figures 7a7f.
Find the hole in the drive plate (67) , align it with the opposite hole and block it with the
supplied Allen key (61).
Place the 3-section cutting blade (51) on the drive plate (67) (see Fig. 7b).
Fit the pressure plate (66) over the thread on the splined shaft (see Fig. 7b).
Fit the pressure plate cover (65) (see Fig. 7d).
Now tighten the nut (64) with the spark plug wrench (63) (see Fig. 7f).
The 3-section cutting blade (51) is fitted with a plastic cover on delivery. This must be
removed before use and refitted during periods when not in use.
The plastic cover can now be removed.
CAUTION! Left-hand thread!
CAUTION! Sharp edges, wear protective gloves
Fit the cutting filament protective guard (C) on the protective guard (50).
The cutting filament protective guard (C ) must be fitted when working with the cutting
filament. The cutting filament protective guard (C ) (pre-fitted on delivery) is fitted as
shown in Figure 8a.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWEG8050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWEG8050 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWEG8050

Powerplus POWEG8050 Gebruiksaanwijzing - Nederlands - 28 pagina's

Powerplus POWEG8050 Gebruiksaanwijzing - Deutsch - 29 pagina's

Powerplus POWEG8050 Gebruiksaanwijzing - Français - 29 pagina's

Powerplus POWEG8050 Aanvulling / aanpassing - Alle talen - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info