550341
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
6
O2 Tech Reg
REMOVAL OF HOSES
WARNING: At least one Second Stage must be connected to
the First Stage to facilitate purging of breathing gas from
the First Stage.
To remove a Hose from the First Stage -
• Ensure that the Regulator System is purged of all breathing gas.
• Loosen and remove the Hose by turning it in the counter clockwise direction
with an open end wrench of the appropriate size.
REGULATOR ATTACHMENT TO A TANK
WARNING: Maximum working pressure for an Oceanic DIN
style connector is 4500 psi / 300 BAR
DIN STYLE CONNECTOR
Before attaching the Regulator to the Tank:
• Slowly open then close the Tank's Valve to allow a momentary flow of
breathing gas to blow any moisture or contaminants from the breathing gas
opening in the Tank Valve.
• Examine the Threads in the Valve to ensure they are clean and free of burrs
or defects that could damage the Threads of your Regulator DIN Fitting.
To attach the Regulator to the Tank:
• Remove the Protector Cap from the Threads of the Regulator DIN Connec-
tor, and examine the Threads and sealing O-ring. Replace the O-ring if it is
damaged.
• Using care not to cross the Threads, thread the DIN Connector clockwise
into the Cavity of the Tank Valve until it is secure.
• Slowly open the Tank Valve (with the Pressure Instrument facing away from
you) and listen to ensure there is no leakage from the Regulator/Tank Con-
nection.
• If any leakage is observed, repeat the attachment procedure and inspect the
sealing O-ring. If air still leaks, DO NOT USE! Take the Regulator and
Tank to an Authorized Oceanic Dealer for inspection and service.
To remove the Regulator from the Tank:
• Close the Tank Valve and purge all pressure from the Regulator System by
depressing the Purge Button of the Second Stage Regulator.
• Turn the DIN Connector Wheel counter clockwise out of Cavity in the Tank
Valve.
• Place the Protector Cap on the Threads of the DIN Connector.
• Prevent water from entering the First Stage. DO NOT blow breathing
gas near a First Stage that does not have the Protector Cap in
place.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oceanic DIN USA Converter bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oceanic DIN USA Converter in de taal/talen: Engels als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info