550341
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
5
Owner's Guide
O24 FIRST STAGE
WARNING: Failure to prepare your First Stage properly for
use in harsh environmental conditions, such as being
subjected to sediment or the possible buildup of ice, or salt
crystals, may result in serious injury or death.
Operation of your First Stage is not visible when using a regulator system. The
First Stage converts the cylinder's high pressure breathing gas to an intermediate
pressure of approximately 140 psi that can be handled by the regulator Second
Stage to deliver a smooth flow of breathing gas upon demand (i.e., when you
inhale). Intermediate pressure gas is also available for inflation of a BC or dry
suit.
WARNING: Under no circumstances should adjustment of
an Oceanic regulator First Stage be performed by anyone
other than an Authorized Oceanic Service Technician. Doing
so may cause failure underwater, resulting in serious injury
or death.
ATTACHMENT OF HOSES
Low Pressure (LP) and High Pressure (HP) Port Thread sizes are different, making
incorrect installation of Hoses unlikely. However, to avoid damage or personal
injury that may occur due to incorrect installation, Oceanic strongly recommends
having installation performed professionally by an Authorized Oceanic Dealer. If
this is not possible, proceed as follows.
Type of Hose Being Connected:
• Determine whether the Hose that you are installing requires connection to
an HP Port (for a Pressure Gauge or Air Integrated Computer), or to an LP
Port (for an Octopus Second Stage, or a BC or Dry Suit Inflator).
• Be sure that you only place high pressure accessory Hoses in Ports specifi-
cally marked with the letters 'HP', or '4500 psi / 300 BAR'.
Installing Hoses:
After having determined the type of Hose -
• Remove the Port Plugs from those Ports to be used by turning them counter
clockwise with a 5/32" hex key. Save for possible future use.
• Lightly lubricate the Hose-End Threads and O-ring with Christo-Lube
MCG111 Lubricant.
• Thread the Hose clockwise into the Port until secure, then tighten it with an
open end wrench of the appropriate size to a torque of 40 in-lbs.
• • Second Stage - 9/16" wrench
• • LP Inflator - 9/16" (or 1/2") wrench
• • HP Gauge or Integrated Computer - 5/8" wrench
• After all Hoses are connected, test the complete Regulator Assembly by at-
taching it to an appropriate Tank, pressurizing the system, and carefully lis-
tening for leakage of breathing gas.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oceanic DIN USA Converter bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oceanic DIN USA Converter in de taal/talen: Engels als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info