824188
6
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
11ninjakitchen.com.au | ninjakitchen.co.nzAUS +61 2 8801 7666 | NZ +64 800 112 660 10 11
USING THE POWER NUTRI CUP
3 Place the Hybrid Edge Blades Assembly
on the top of the cup and turn clockwise
to seal.
5a If using an Auto-iQ program, select
the program that best suits your
desired output. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop.
4 Turn the cup upside down and install on
the motor base by aligning the tabs on
the cup with the slots on the base. Then,
rotate cup clockwise until it clicks. Once
locked in place, the available program
buttons will illuminate and the unit will
be ready for use.
7 Remove the blade assembly by twisting
anti-clockwise. DO NOT store blended
contents with the blade assembly
attached. Only use the Spout Lid to
cover. Exercise care when handling the
blade assembly, as the blades are sharp.
8 To enjoy on the go, place the Spout Lid
onto the cup and twist lid clockwise
until firmly sealed.
9 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
6 Remove the cup from the motor base
by turning it anti-clockwise and then
lifting up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
2 Add ingredients to the Power Nutri Cup.
DO NOT add ingredients past the
MAX LIQUID line.
1 Plug in motor base and place on a clean,
dry, level surface such as a worktop or table.
NOTE: If the unit is plugged in, but the
jug or cup and blade assembly is not
properly installed, the timer will display
- -” and the motor will be disabled.
NOTE: If the motor base is dicult
to remove from the worktop or table,
slide it across the surface, then lift. It
shouldn’t be forced as the suction cups
will grip more tightly to the surface.
NOTE: Auto-iQ programs have pauses
and changes in speed throughout the
cycle.
NOTE: The Power Nutri Cup and Jug
share the Hybrid Edge Blade Assembly.
Unscrew from pre-assembled Jug.
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
WARNING: Handle the Hybrid Edge
Blades Assembly with care, as the blades are
loose and sharp.
WARNING: Remove utensils prior to
processing. Failure to remove may cause the
Power Nutri Cup to be damaged or to shatter,
which may cause personal injury.
WARNING: Do not blend hot, eervescent,
or carbonated liquids. Doing so may cause
excessive pressure buildup, resulting in risk
of laceration and/or the user being burned.
WARNING: Remove the Hybrid Edge
Blades Assembly from the Power Nutri Cup upon
completion of blending. Do not store ingredients
before or after blending them in the cup with the
blade assembly attached. Some foods may
contain active ingredients or release gases that
will expand if left in a sealed container, resulting
in excessive pressure buildup that can pose a risk
of injury.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ninja CB150ANZ bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ninja CB150ANZ in de taal/talen: Engels als bijlage per email.

De handleiding is 1,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info