824188
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
9ninjakitchen.com.au | ninjakitchen.co.nzAUS +61 2 8801 7666 | NZ +64 800 112 660 8 9
USING THE POWER NUTRI JUG
3 Install the lid by aligning the red tab to
the right of the jug handle. Rotate the tab
clockwise into the jug handle to align and
lock into place.
5a If using an Auto-iQ program, select the
program that best suits your desired
output. During the blending process,
twist the Power Paddle anti-clockwise
continuously. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop. During the blending
process, make sure to twist the Power
Paddle anti-clockwise continuously.
4 Install the jug onto the base. Rotate
jug clockwise until it clicks into place.
Programs will illuminate when unit is
ready to use.
7 When blending is complete, remove
the jug from the base. Remove lid and
empty contents. When jug is empty,
remove blade assembly. DO NOT
store blended contents with the blade
assembly attached. Exercise care when
handling the blade assembly, as the
blades are sharp.
6 Remove the jug from the motor base by
turning it anti-clockwise and then lifting
up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
1 Plug in motor base and place on a clean,
dry, level surface such as a worktop
or table.
2 Screw on the blade assembly until you
have a tight seal and add liquid then
ingredients to the Power Nutri Jug. DO
NOT add liquid past the LIQUID FILL line
or ingredients past the MAX FILL line.
8 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
NOTE: While processing, twist the Power
Paddle anti-clockwise continuously.
NOTE: If results are too thick, open the
drizzle hole cap and add more liquid.
Close the cap and continue twisting the
tamper anti-clockwise during blending.
NOTE: If the motor base is dicult to
remove from the worktop or table, slide
it across the surface, then lift. It shouldn’t
be forced as the suction cups will grip
more tightly to the surface.
NOTE: Keep the drizzle cap closed when
processing liquids.
NOTE: If the unit is plugged in but the
jug or cup and blade assembly is not
properly installed, the timer will display
- -” and the motor will be disabled.
NOTE: Auto-iQ programs have pauses
and changes in speed throughout
the cycle.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ninja CB150ANZ bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ninja CB150ANZ in de taal/talen: Engels als bijlage per email.

De handleiding is 1,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info