30282
54
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
ROYAL evo
Seite 54
18.6. Sub-menu „New model“
When you open this sub-menu the following display
appears:
The transmitter tells you which memory number will
be used: it is always the first vacant memory. You can-
not change the memory number.
The template determines which basic settings are ac-
cepted into the memory (Î 12.4.). You can change this
setting if you wish.
Servo conf. (Servo configuration) defines the assign-
ment of the servos and the signal format. The following
combinations are possible:
Servo conf..
Servo
assignment
Signal format
MPX-MPX
MPX MPX
MPX-UNI
MPX UNI
Futaba
Futaba UNI
JR
JR UNI
The brand-specific assignment sequence (order of ser-
vos at the receiver output) is prepared in four servo
configurations. For MULTIPLEX e.g.: Throttle is on servo
4 and Rudder on servo 3. If the model was operated
with a radio of a different brand before, using the corre-
sponding configuration eases the assignment proce-
dure. In the menu K, Assignment the preset sequence
can be modified to your liking.
Mode defines the assignment of the sticks. In our ex-
ample the left-hand stick controls rudder and elevator.
You can change this setting if you wish.
Assignment defines which of the possible assignment
lists for transmitter controls and switches is to be used
with this model. You can change this setting if you wish.
Select OK to conclude the process, and the new model
is created.
Note:
If there are no vacant memories available, the screen
displays the number -1 and the note “No memory free!”
In this case press ENTER and then “EXIT” the menu.
19. Accessories
19.1. Scanner (with HFM-S RF module)
A scanner module can expand the Synthesizer RF mod-
ule HFM-S of the ROYALevo. The scanner can do two
„jobs“:
19.1.1. Scan the all frequencies/channels in
the band
All channels in the band will be measured sequentially.
Detected signals will show up in the display as bars. The
height of the bar corresponds to the strength of the
signal.
19.1.2. Channel-Check at power-ON
The channel selected for the synthesizer is checked
every time you switch your transmitter ON. If the chan-
nel is occupied already the synthesizer does not start
operation (no RF output) and in the display you will see
a warning. If no signal is detected on your channel,
normal operation starts.
19.1.3. Installation of the scanner module
The user can install the scanner. No tools or adjustments
are required.
Available frequencies/bands: see 19.3. Acessories
Detailed instructions are attached to the scanner mod-
ule.
19.2. Channel-Check
(with the RF module HFM-4)
A Channel-Check module can be installed in the RF
module HFM-4. This module needs a receiver crystal
with the same frequency/channel, which will be used
for the model.
Every time you switch your transmitter on, the module
checks if the channel is occupied or not.
The Channel-Check module for the ROYALevo
is identical with the module, used in the trans-
mitters PiCO line, COCKPIT MM and in the RF
module HFM3.
Available frequencies/bands: see MULTIPLEX
main catalogue
19.2.1. Installation of the Channel-
Check module
Switch OFF and open the transmitter
remove the RF module
Install the desired receiver crystal in the Channel-Check
module
plug Channel-Check module onto the RF module
reinstall the unit in the transmitter
19.2.2. Operating Channel-Check
Expand the aerial fully
Switch the transmitter on
LED glows permanently: Channel occupied
LED flashes: Channel free
(without guarantee)
If the channel is occupied the following message ap-
pears in the display:
Channel Used!
Channel-Check
module
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Multiplex ROYALevo9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Multiplex ROYALevo9 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Multiplex ROYALevo9

Multiplex ROYALevo9 Gebruiksaanwijzing - Nederlands - 110 pagina's

Multiplex ROYALevo9 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info