628910
28
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
Operating Instructions
Power Peak
®
D7 EQ-BID
Order No.
8129
13
14.2 EQUALIZER DISPLAY
When a Lithium battery is being charged or discharged, the screen
of the Power Peak
®
D7 EQ-BID can display the voltage of the indi-
vidual cells: press the "START / ENT." button during the process
(charge, discharge). It is absolutely essential to connect the Lithium
batterytothechargerusingtheVoltageSensorlead.
This screen display provides an overview of the state of balance of
the battery as a whole. The lower illustration shows the display for
a three-cell pack; the individual battery cells are well balanced: the
voltagedifferenceis20mV.
The top line (Output:) shows the total battery voltage.
The next line down shows the minimum and maximum cell voltages
in the pack.
This is followed by a display of the individual cell voltages with a
resolutionof10mV.
This type of display provides a fast and very accurate overview of
the voltage of the individual cells.
Pressing the "START / ENT." button again calls up the graphic
display.
Graphic display:
(DataView)
Main :11.39V
Max:3.81V
Min:3.79V
3.79V3.79V3.81V
0.00V0.00V0.00V
0.00V
15. SCREEN DISPLAYS AFTER A PROCESS
The end of a charge / discharge process is indicated by the on-
screen message "End: XXXX"; you will also hear a melody. The
screennowdisplaysalltheimportantdatafortheprocessjust
completed. Holding the "STOP / ESC" button pressed in for at least
two seconds resets the messages, and the main menu reappears.
15.1 TEXT DISPLAYS
The screen displays the current settings. As well as showing the
completed process in the first line, the second line shows the
reason for the cut-off as a flashing item. At the same time and
according to the programming and battery type, the following will
be displayed as flashing items.
•End:Charge
•End:Automatic
•End:Fastcharge
•End:Discharge
•End:Storage
•End:Re-peak
•End:Cycle
•End:Balance
NOTE:
Asalreadymentioned,thedisplayadjustsitselftothebatterytype
and the selected cut-off method. Since it is not possible to show
all the displays, it is necessary to analyse and interpret the text
which appears.
16. PROGRAMMING A BID CHIP OR KEY
As soon as a BID chip or key is connected to the charger, the
charger switches to BID mode for displaying or programming the
BID chip or key. If the beeper is active, you will hear a brief beep
at this point. The same applies if the charger is switched on with
a BID chip or key already connected. The picture below shows
this situation.
The screen displays the following data, which can be program-
med:
1st line: date (01/01/2014): here you can store the date for the first
time you use the battery.
2nd line: battery type, cell count, capacity, programmable.
3rd and 4th lines: charge current, discharge current, user-variable.
5thline:TVCvoltage:thiscanbechangedtemporarily,butcannot
be stored on the BID.
The BID chip / key is programmed using the method described for
the"Memoryname"menuonpage8.
Once you have entered the battery date, the values must be
BID EDIT (01/01/2000)
LiPo7.4V2000mAh
Chg Current : 2.0 A
dChg Current : 1.0 A
dChgVolt :3.2V/C
TVCVolt :4.20V
Save to BID
v (voltage curve)
11.46V 00:01:38
DurationActual voltage
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Multiplex Power Peak D7 EQ-BID - 30 8129 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Multiplex Power Peak D7 EQ-BID - 30 8129 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 9,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info