494220
48
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
93 94
Types of Custom Functions
C-00 Custom functions No.
0: [Initial setting]
1: A
2: B
3: C
When “0” has been selected and set, none
of the custom items can be set. “1,” “2” or
“3” must be selected and set without fail.
C-01 Steps of aperture, shutter speed,
exposure compensation
This function is used to set the shutter
speed, f-number and exposure
compensation value step width.
0: 0.3 (1/3EV step: initial setting)
1: 0.5 (1/2EV step)
2: 1.0 (1EV step)
C-02 Data imprinting
This function is used to set whether to
imprint the shooting data on the film.
0: No imprinting (initial setting)
1: Yes (data, index)
2: Yes (date, index)
C-03 Aperture setting after lens
change
This function is used to set the
f-number display method for the
previously used lens when the lenses
have been changed over. The initial
setting is “Yes,” in which case the
f-number of the lens prior to the
changeover is displayed.
0: Yes (previous f-number: initial
setting)
1: Aperture open
2: Minimum aperture setting
3: Number of stops from open
C-04 Metered value display time
This function is used to set the time it
should take for sleep mode to be
established after the camera’s power is
turned on. The initial setting is 15
seconds. 5, 10, 15, 20, 25, 30, 40, 50,
60 or “on” can be selected and set.
Note that the batteries will discharge when
“on” (no sleep mode) has been set.
C-05 Range of exposure compensation
This function is used to set the
maximum extent of exposure
compensation. Its setting takes effect in
AE shooting modes (P, Tv and Av).
0: ± 3EV (initial setting)
1: ± 5EV
C-06 External LCD backlight
This function is used to set the method
for lighting the backlight of the external
LCD panel.
0: Set using Backlight button (initial
setting)
1: Always on (metering retention
period)
C-07 Select battery
This function is used to set the
batteries used in the camera so that the
remaining battery charge will be
displayed correctly on the external LCD
panel.
0: Primary batteries (alkaline-
manganese batteries, lithium
batteries: initial setting)
1: Secondary batteries (nickel-metal
hydride batteries, nickel-cadmium
batteries)
C-08 Bracketing order
This function is used to set the shooting
sequence for auto bracketing. The
initial setting is “n-u-o” (normal/under/
over). The shooting sequence for 2-
frame bracketing is set in auto
bracketing setting mode.
0: n-u-o (normal/under/over: initial
setting)
1: n-o-u (normal/over/under)
2: u-n-o (under/normal/over)
3: o-n-u (over/normal/under)
C-09 Cancel auto bracket
This function is used to set the release
method of the auto bracketing shooting
setting upon completion of auto
bracketing shooting.
0: Released by turning the power
OFF (initial setting)
1: Until released
2: Released after one shot
C-10 Manual mode bracketing
This function is used to set whether
bracketing is to be performed using the
shutter speed or f-number during M
(manual) mode auto bracketing
shooting.
0: Shutter speed (initial setting)
1: F-number
C-11 Front/Rear dial function exchange
in manual mode
This function is used to change over
the operations of the front and rear
dials in the M (manual mode).
0: Front dial: shutter speed, rear dial:
f-number (initial setting)
1: Front dial: f-number, rear dial:
shutter speed
C-12 Rear function dial enabled/
disabled
In the initial setting, exposure
compensation can be provided by the
sub (rear) dial in P, Tv and Av modes.
This function is used to set whether to
allocate the operations of the front dial
to the rear dial.
0: No (exposure compensation: initial
setting)
1: Yes
C-13 Dial function direction
This function is used to determine the
direction in which the electronic dial is
to be rotated to increase and decrease
shutter speed, the f-number, and
exposure compensation.
0: No switching (CCW: decrease,
CW: increase: initial setting)
1: Switched (CCW: increase, CW:
decrease)
C-14 Program shift
This function is used to set the type of
program shift. Under the initial setting,
the shifting is performed along the
program line. Av enables aperture-
priority shift within the possible
metering range; Tv enables shutter
speed-priority shift.
0: Program shift (initial setting)
1: F-number shift
2: Shutter speed shift
C-15 AEL & AFL function button
exchange
This function is used to set whether to
change over the functions of the front
and rear AEL and AFL buttons.
0: No (front: AFL, rear: AEL: initial
setting)
1: Yes (front AEL, rear: AFL)
C-16 Half-press shutter release
function mode
This function is used to set the AE lock
and AF operations when the shutter
button is half-pressed.
0: AF operation (initial setting)
1: AF operation/AE lock
C-17 AEL function lock/unlock mode
This function is used to set the method
of operating the AEL button to lock AE.
At the initial setting, when the AEL
button is pressed, AE is locked;
pressing the button again
releases the AE lock. At the “1” setting
(released after one shot), after AE lock
is set, it is released when the shutter is
tripped. At the “2” setting, AE lock is set
while the shutter button is being
pressed.
0: Continuous: initial setting
1: Released after one shot
2: While the shutter button is pressed
C-18 Focus indicator selection
This function is used to set whether the
defocusing mark is to be displayed.
0: Yes (initial setting)
1: No (focusing mark only)
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mamiya 645 AFD III bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mamiya 645 AFD III in de taal/talen: Engels als bijlage per email.

De handleiding is 2,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info