494220
8
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
Batteries Care
1. Battery life of the originally supplied batteries is dependant on storage conditions.
2. Blots and fingerprints on terminals may cause loose connection and corrosion. Wipe
them off before loading the batteries.
3. It is advised to carry spare batteries in remote or foreign locations.
4. Battery performance decreases in low temperatures. Keep them warm when in cold
climates or locations.
External battery case PE401 is available as an optional accessory.
5. Store the batteries in a cool and dry place, away from direct sunlight.
6. Remove the batteries from the camera body when they will not be used for a long
time.
7. Replace the batteries with new ones as soon as they are exhausted. Liquid leakage
from the battery may damage the camera.
8. Read the label warnings of the batteries for their handling.
Battery Power / Battery Care
Remaining battery
charge display
Battery power
The camera’s power is turned on when the drive
dial is set to “S,” “C” or “M.UP.” In order to prevent
the camera’s batteries from discharging, sleep
mode is automatically established if no operations
are performed for a specific period of time while the
power is ON (with exposure metering status
maintained).
The initial setting for the exposure metering
status maintenance period is 15 seconds. It can be
changed at any time to a period within a 5- to 60-
second range using the custom settings. (C-04 on
page 93)
In sleep mode, operating the shutter button or function setting button restores power
ON status.
In sleep mode, the shutter speed and f-number among the external LCDs go off, and
the marks shown in the figure are displayed. (These marks appear in program AE
mode.)
For the purpose of the descriptions and explanations provided in these
instructions, it is assumed that the camera’s power is on.
13 14
Installing the Battery in the Magazine
2. Insert a battery.
Insert the battery according to the polarity indica-
tion in the battery compartment, and close the
battery cover.
Battery used: Sony CR2032 or equivalent
Be sure to insert the battery with the correct
polarity
The button battery supplies power to the magazine's LCD when the film magazine is
detached from the camera.
1. Remove the battery compartment
screw cap.
Use a coin or suitable screw driver and turn it
counter clockwise.
When the magazine is installed onto the body, the power will be supplied to the maga-
zine from the camera body.
You can take shots without installing the battery into the magazine. However, if you
remove the magazine from the body, the magazine does not indicate film sensitivity
or number of shots.
The magazine does not have a battery level indicator. When the magazine LCD panel
becomes dark or disappears, replace the battery. As a rough guideline, the battery
should last approx. one year.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mamiya 645 AFD III bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mamiya 645 AFD III in de taal/talen: Engels als bijlage per email.

De handleiding is 2,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info