476833
7
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
7
Chain Saw Nomenclature
1
2
3
4
5
7
8
10
12
13
14
15
16
9 Guide bar
10 Oil cap
11 Nameplate
12 Lock-off button
13 Rear handle
14 Trigger switch
15 Oil tank with sightglass for oil level
16 Saw chain
1 Front handle
2 Front handle guard
3 Spike bar
4 Fastening nut
5 Sprocket guard
6 Carbon brush cover
7 Cord
8 Guide bar nose
Bucking: The process of cross cutting a felled tree or log
into lengths.
Chain Brake: A device used to stop the chain saw.
Chain Saw Powerhead: A chain saw without the saw
chain and guide bar.
Clutch - A mechanism for connecting and disconnecting
a driven member to and from a rotating source of power.
Drive Sprocket or Sprocket: The toothead part that
drives the saw chain.
Felling - The process of cutting down a tree.
Felling Back Cut : The final cut in a tree felling operation
made on the opposite side of the tree from the notching
undercut.
Front Handle: The support handle located at or toward
the front of the chain saw.
Front Handle Guard: A structural barrier between the
front handle of a chain saw and the guide bar, typically
located close to the hand position on the front handle
and sometimes employed as an activating lever for a
chain brake.
Guide Bar: A solid railed structure that supports and
guides the saw chain.
Kickback: The backward or upward motion, or both of
the guide bar occurring when the saw chain near the nose
of the top area of the guide bar contacts any object such
as a log or branch, or when the wood closes in and
pinches the saw chain in the cut.
Kickback, Pinch: The rapid pushback of the saw which
can occur when the wood closes in and pinches the
moving saw chain in the cut along the top of the guide
bar.
Kickback, Rotational: The rapid upward and backward
motion of the saw which can occur when the moving saw
chain near the upper portion of the tip of the guide bar
contacts an object, such as a log or branch.
Low-Kickback Chain: A chain that complies with the
kickback performance requirements of ANSI B175.1
when tested on a representative sample of chain saws.
Normal Cutting Position: Those positions assumed
in performing the bucking and felling cuts.
Notching Undercut: A notch cut in a tree that directs
the trees fall.
Oiler Control: A system for oiling the guide bar and
saw chain.
Rear Handle: The support handle located at or toward
the rear of the saw.
Reduced Kickback Guide Bar: A guide bar which
has been demonstrated to reduce kickback signifi-
cantIy.
Replacement Saw Chain: A chain that complies with
the kickback performance requirerments of ANSI
B175.1 when tested with specific chain saws. It may
not meet the ANSI performance requirements when
used with other saws.
Saw Chain: A loop of chain having cutting teeth, that
cut the wood, and that is driven by the motor and is
supported by the guide bar.
Spike Bar (Spike): The pointed tooth or teeth for use
when felling or bucking to pivot the saw and maintain
position while sawing.
Switch: A device that when operated will complete or
interrupt an electrical power circuit to the motor of the
chain saw.
Lock-Off Button: A movable stop that prevents the
unintentional operation of the switch until manually
actuated.
6
9
11
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Makita UC 4000A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Makita UC 4000A in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 2,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Makita UC 4000A

Makita UC 4000A Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info