483677
6
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
6
A
Drill and impact mode selector (Fig. 4)
Fig. 4
The drill and impact mode selector is on the top of this
impact drill.
Turn the drill /impact mode selector (3) to the drill/impact
position “ to select the drill/impact mode of action.
Turn the drill/impact mode selector to the drill position
to select the drill mode of action.
Auxiliary handle subassembly
Fig. 5 Fig. 6
The auxiliary handle subassembly (11) will provide additional control, support and guidance for the drill (see
Fig. 5). The handle is adjustable to any position around the 360°handle collar mount.
Installing the auxiliary handle subassembly:
Loosen the collar mount by turning the adjustment knob for auxiliary handle (10) adequately.
Slide the handle over the chuck and secure in the position shown, then slide the handle over the handle
collar mount on the suitable position of this tool. Finally securely tighten the adjustment knob (10).
NOTE: Use auxiliary handle supplied with the tool. Loss of control can cause personal injury.
Depth Gauge (see Fig. 6)
Your drilling depth can be pre-set and/or repeated by using the depth gauge (4). The depth gauge helps
keep an accurate depth when drilling holes to a set depth.
Setting depth: loosen the adjustment knob for auxiliary handle (2) adequately, place the straight part of the
depth gauge (4) in the hole and slide the depth gauge to desired depth and securely tighten the
adjustment knob again.
Checking the depth: check the depth with a steel rule for most accurate measurement and then turn the
adjustment knob (2) to tighten the auxiliary handle in the required position.
For Proper Operations
• Hold the drill with your rst two ngers on the on/o switch.
• Use the auxiliary handle where possible to gain extra control and to prevent fatigue.
• For wood, use twist drill bits, spade bits power auger bits, or hole saw.
• For metal use high seed steel twist drill bits or hole saws.
• For masonry, such as brick, cinder block, cemetery, etc, use carbide tipped drill bits.
Use enough pressure to keep the bit biting but do not push so hard that do not stall the motor or damage
the bit.
• Always apply pressure in a straight line with the bit.
• Hold the drill rmly to control the twisting of the drill.
71777 76067 manual.indd 6 31-12-10 15:53
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kinzo 71777 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kinzo 71777 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 4,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info