483677
5
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
5
A
Fig. 1
1. Chuck
2. Adjustment knob for depth gauge
3. Drill / impact mode selector
4. depth gauge
5. ON/OFF switch
6. Lock-on button
7. Chuck key
8. Speed control dial
9. Forward/reverse lever
10. Adjustment knob for auxiliary handle
11. Auxiliary handle
Technical Specification:
Rated voltage: 230V AC
Frequency: 50Hz
Rated Power: 500W
Max diameter of drill: 13 mm
No load speed: 0~3000 /min
PREPARATION AND ADJUSTMENT
WARNING: Prior to assembly and adjustment always pull out the power plug from the mains socket.
Changing drill or screwdriver bits
Fig. 1
1. Insert the chuck key (7) in one of the three holes on the side of the chuck (1), turn to open.
Insert the desired bit or drill in the chuck and turn the chuck key the opposite way until the chuck has a
firm grip on the bit.
2. Check that the bit is in the centre of the chuck and is secure.
Switching on/off (Fig. 3)
Fig. 3
• Plug the cord set into power socket.
Choose rotation direction of the chuck as required through
pushing the forward/reverse lever (9) to the left or right.
Then depress the trigger switch to start operation.
• Release the on/o switch to stop the tool.
Press the lock-on button (6) when the ON/OFF switch (5)
is completely depressed if the continuous operation is
required.
Press the trigger switch then release it to disengage the
lock-on button.
To release the ON/OFF switch and turn the tool o.
Variable speed (Fig. 3)
This tool has a speed control dial (8) that delivers higher speed by turning to the “+” direction, and delivers
lower speed by turning to “-”direction.
Forward/reverse lever (Fig. 3)
The forward/reverse lever (9) is to determine the rotation direction of the chuck.
To select forward rotation, release the on/o switch and push the forward/reverse lever to right (R) side of
the tool. To select reverse rotation, push the lever to left (L) side of the tool.
NOTE: When changing the position of the forward/reverse lever, be sure the ON/OFF switch (5) is released
and the motor is stationary.
71777 76067 manual.indd 5 31-12-10 15:53
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kinzo 71777 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kinzo 71777 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 4,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info