520196
13
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
29
5. Press / to display either ”On” or ”Off” and
press to confirm. For ”Key”, select from
”Pattern 1-3” or ”Off” and press
6. Press to exit and return to standby mode.
D.6. DIAL mode
You can set your phone to use either ”Tone” or ”Pulse”
dialing. The pre-set setting is ”Tone” dialling, where you
will hear a tone beep each time you dial a number. Most
modern exchanges and switchboards use ”Tone” dialling, so
you should not need to change this setting. Only change it if
your service provider or switchboard uses ”Pulse” dialling.
Key Map:
Setting Base Additional Dial
Mode select Tone/Pulse
1. Press
to access the main menu.
2. Press
/ to select ”Setting Base”. Press
3. Press / to select ”Additional”. Press
4. Press / to select ”Dial Mode”.Press .
The current setting is displayed.
5. Press
/ to select either ”Tone” or ”Pulse”.
Press to confirm.
6. Press
to exit and return to standby mode.
D.7. Tone dialling Switch-Over
If you have set your phone to use ”Pulse” dialling, you can
switch temporarily to ”Tone” dialling for the duration of a
call:
During off-hook state, press and hold ”D” will be
displayed. Any digits entered after the ”D” will be dialled
using tone dialling.
D.8. Prefix dialling
If you need to add a prefix to the number for a long distance
call, or if you need to add your saved area code to the
number, do the following:
Key Map:
Setting Base Additional
Prefix Dial
enter the number
1. Press to access the main menu.
2. Press
/ to select ”Setting Base”. Press
3. Press
/ to select ”Additional”. Press
4. Press / to select ”Prefix Dial”.Press .
The current setting is displayed.
5. Enter the number using the number keypad or press
to clear. Press to confirm.
6. Press
to exit and return to standby mode.
D.9. Call barring
When switched on, Call Barring prevents calls from being
made to a specific number, area code or international code.
Key Map:
Setting Base Call Barring
enter the number select On/Off
1. Press to access the main menu.
2. Press
/ to select ”Setting Base”. Press
3. Press
/ to select ”Call Barring”. Press
4. Enter the number using the number keypad or to
clear. Press to confirm.
5. Press
/ to select ”On” or ”Off”. Press
to confirm.
6. Press
to exit and return to standby mode.
E. NORMAL OPERATION
E.1. Using an optional headset
An optional headset can be used as an alternative method to
make a call and this is especially useful for long calls.
Connect the headset cord to the headset jack on the back of
the base unit. When the headset is not in use, simply press
the button to toggle the headset mode and return to
normal handset or speaker phone mode.
Caution
The headset jack type is 2.5 mm pin. Please contact your
local supplier for compatible headset. Using other headsets
may damage the unit.
E.2. To make a call
Using the handset:
1. Pick up the handset. The display will show the handset
icon .
2. Use the keypad to enter the number you wish to dial.
3. Hang up the handset when finished.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Jacob-Jensen-50-DECT

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jacob Jensen 50 DECT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jacob Jensen 50 DECT in de taal/talen: Engels als bijlage per email.

De handleiding is 2,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info